Get quotes for a used or replacement Fiat Scudo steering box. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Fitment on a used steering box varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:
No — the Fiat Scudo (across all generations) uses rack-and-pinion steering, not a steering box. A steering box is a recirculating-ball or worm-and-roller unit typically found on older or heavier vehicles; the Scudo was never fitted with one. If you need a steering part, you are most likely looking for a steering rack, a power steering pump, or possibly a steering column component — search for those instead.
The first-generation Scudo ran from 1995 to 2006 and used a rack-and-pinion steering rack, which is the part you should be searching for. Fitment within this generation can vary with engine size and whether the van is the standard or long-wheelbase body, so confirm the exact variant with the breaker against your registration. A steering rack from a same-generation Peugeot Expert or Citroën Dispatch of the same era may also be compatible, as these vans share a common platform — again, verify this with the breaker before purchasing.
The second-generation Fiat Scudo launched in 2007 on a new platform shared with the Peugeot Expert Mk2 and Citroën Dispatch Mk2, making it a different generation to the 1995–2006 van — steering racks from these two generations are not interchangeable. If your van sits on either side of that 2007 boundary, confirm the exact part reference with the breaker against your registration plate. Do not assume a 2006 rack will fit a 2007 van or vice versa.
No, trim level does not affect steering rack fitment on the Fiat Scudo — the rack is determined by the generation, wheelbase, and GVW/payload rating of the van, not by whether it is a base or higher-spec variant. Trims like SX or Comfort relate to cab equipment and comfort features, not the running gear. Focus on matching the generation (pre-2007 or 2007-onwards), wheelbase, and payload plate when sourcing a used rack from a breaker.
On the Scudo, the steering rack is primarily determined by the generation and the van's GVW rating rather than engine displacement, but it is worth confirming with the breaker because heavier-duty variants can sometimes carry different power steering setups. Both the 1.6 and 2.0 diesel variants were offered in the second-generation van, and while the rack is typically the same across these, always quote your registration to the breaker so they can cross-reference the correct part. Never assume a part fits based on engine size alone without confirmation.
No — if a seller is listing a steering box specifically for a Fiat Scudo, that is most likely a mislabelled or incorrectly described part. The Scudo uses rack-and-pinion steering across all variants and years, so there is no such thing as a Scudo steering box. Ask the seller to confirm the exact part and its condition; what you actually need is a steering rack, and a reputable breaker will be able to supply the correct component against your registration.