Cheap Fiat Panda Subframe
Get quotes for a used or replacement Fiat Panda subframe. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
A buyer's guide to used Fiat Panda subframe
No two subframes are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
- State whether it's front or rear
- State if it's 2WD or 4WD
Other used Fiat Panda parts
- Used Fiat Panda Steering Rack
- Used Fiat Panda Brake
- Used Fiat Panda Front Cross Member
- Used Fiat Panda Wheel Hub
- Used Fiat Panda Exhaust System
- Used Fiat Panda Door Handle
- Used Fiat Panda Seat
- Used Fiat Panda Differential
- Used Fiat Panda Battery
- Used Fiat Panda Rear Light
- Used Fiat Panda Bonnet
- Used Fiat Panda Bulkhead
Used subframe for other Fiat models
Fitment questions
What years does the Fiat Panda subframe fit across – are there different generations to watch for?
The Fiat Panda runs across two main generations relevant to used buyers: the second-generation (Mk2) ran from 2003 to 2012, and the third-generation (Mk3) ran from 2012 onwards. Subframes are generation-specific, so a Mk2 subframe will not cross over to a Mk3 without significant issues. Always confirm with the breaker against your exact registration to be sure.
Will a subframe from a 2010 Panda fit my 2013 Panda?
A 2010 Panda is Mk2 (2003–2012) and a 2013 Panda is Mk3 (2012 onwards), so these sit either side of a generation boundary and the subframe is unlikely to be a direct swap. Running gear design changed significantly between generations, so you should not assume compatibility. Confirm with the breaker against both registrations before ordering.
Does engine size affect which subframe I need on a Fiat Panda?
Engine size can influence subframe specification on some models, as heavier or more powerful engines may be paired with different front-end running gear. For the Panda, confirm with the breaker whether the subframe from a 1.2 petrol will match a TwinAir or diesel application, as mounting points or reinforcement could differ. Give your breaker the full engine code alongside your registration for the safest match.
Does it matter if I buy a subframe from an Active, Dynamic, or Lounge trim Panda?
Trim level does not affect subframe fitment – the Active, Dynamic, and Lounge trims are cosmetic and equipment-level differences rather than structural ones. What matters is the generation and engine size, not what badge is on the tailgate. You may find minor surface differences in condition or any attached brackets, but the subframe itself should be the same across those trims within the same generation.
Can I use a Panda 4x4 subframe on a standard two-wheel-drive Panda?
The Panda 4x4 has a different drivetrain layout to the standard front-wheel-drive models, which is very likely to mean differences in the subframe design and mounting points. These should be treated as distinct applications rather than interchangeable parts. Confirm this firmly with the breaker against both registrations before purchasing, as fitting the wrong subframe could affect handling and safety.
Do I need to tell the breaker anything specific when asking for a Panda subframe?
Yes – give the breaker your registration plate, which lets them verify the generation (Mk2 2003–2012 or Mk3 2012 onwards) and engine code accurately. It is also worth mentioning whether your car is four-wheel drive, as that changes the subframe specification. The more detail you provide upfront, the better your chances of getting a part that bolts straight in without complications.