Cheap Fiat Panda Fog Light

Fog lights were available on the Fiat Panda but were not fitted to every car - they appeared as standard or optional equipment on higher trim levels such as Eleganza and Cross variants, particularly on the third-generation model (2012 onwards), but many entry-level Active and Easy cars left the factory without them. If your Panda does not have fog lights fitted, adding them is not always straightforward as the bumper and wiring may differ. Check your existing bumper for blanked-off apertures and confirm with a breaker whether the car you are sourcing from matches your setup.

Both the 2012 and 2014 Panda fall within the third generation (169 replacement, from 2012 onwards), so they share the same front-end design and the fog light units are generally the same. However, you should confirm with the breaker against your registration that no running changes were made between those two years, as minor updates can affect fit. This generation is the safest pool to source from.

No - the second-generation Panda ran from 2003 to 2012 and the third generation from 2012 onwards, and these are entirely different platforms with different front bumpers, so fog lights are not interchangeable between them. Always confirm the generation of the donor car with the breaker using your registration and theirs before agreeing a purchase.

Trim level does not affect the physical fog light unit itself - where a fog light is fitted, the part is the same across Active, Easy, Eleganza, and Cross trims within the same generation. The main difference to be aware of is that some lower trims had blanked bumpers with no fog light aperture, so a car without factory-fitted fogs may need a different bumper as well as the light unit. Confirm with the breaker that the donor car had fog lights fitted as original equipment rather than added later.

The third-generation Panda received a facelift around 2020-2021 which updated the front bumper and lighting cluster, and this is the key boundary to be aware of when sourcing a used fog light. Pre-facelift and post-facelift fog lights and their housings may differ in design and mount points, so crossing that boundary needs caution - confirm with the breaker whether a part from across that facelift date is suitable for your specific registration. Sticking to a donor car from the same side of the facelift is the safest approach.

No - the nearside (passenger side) and offside (driver side) fog lights are handed and are not interchangeable with one another, as they are shaped and mounted to suit each respective side of the bumper. When contacting a breaker, make sure you specify clearly whether you need the NS or OS unit to avoid receiving the wrong side.