Fiat 500X Fog Light Replacement Parts

Front fog lights were fitted to many Fiat 500X variants as standard or as an option depending on trim level, so they do exist on this model. However, not every 500X left the factory with them — lower-spec trim levels sometimes omitted front fogs entirely, meaning a fog light housing may be absent on some cars. If you're unsure whether your car originally had them, check your front bumper for the fog light apertures or consult your V5C trim level against Fiat's options list.

This is the key fitment question for the 500X, because the model received a facelift in 2018 which brought changes to the front bumper, lights and grille. A pre-facelift fog light (2014–2017) and a post-facelift one (2018 onwards) are likely to be different parts, but whether they physically interchange is something you should confirm with the breaker against your exact registration before buying.

Trim level does not affect fog light fitment on the 500X — the front-end structure is shared across the range within the same generation and facelift period. You may find cosmetic differences such as fog light surrounds or bezel finishes between trims, so visually compare the donor part to your own bumper if appearance matters. What counts is matching the correct facelift era, not the trim name.

The Fiat 500X launched in the UK in 2014 and the facelift arrived for the 2018 model year, so pre-facelift cars run from approximately 2014 to 2017. Within that pre-facelift generation the fog lights should be compatible with one another, as the front-end design was consistent across those years. Always confirm with the breaker using your registration to be certain, as minor running changes can occur during a production run.

No — the engine and drivetrain (front-wheel drive or four-wheel drive) do not influence fog light fitment on the 500X, as front-end panels are shared across all powertrain variants within a generation. Whether you have a petrol, diesel, or the AWD CrossPlus version makes no difference to the fog light housing or surround. Focus on matching the correct facelift period rather than the engine code.

The 2018 facelift changed the front bumper design on the 500X, which almost certainly means the fog light units and their housings differ between the two periods. Fitting a post-facelift fog light to a pre-facelift bumper — or vice versa — is unlikely to be a straightforward swap, but the exact interchangeability is not something we can guarantee and you should raise this directly with the breaker, quoting your registration, before purchasing.