Cheap Fiat Multipla EGR Valve
Get quotes for a used or replacement Fiat Multipla egr valve. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Choosing the right used Fiat Multipla egr valve
Used egr valves vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
- State whether it's petrol or diesel
- State the engine code if known
Other used Fiat Multipla parts
- Used Fiat Multipla Catalytic Converter
- Used Fiat Multipla Lambda Sensor
- Used Fiat Multipla Exhaust System
- Used Fiat Multipla DPF
- Used Fiat Multipla Door Card
- Used Fiat Multipla Fuel Filter
- Used Fiat Multipla Central Locking Motor
- Used Fiat Multipla Wiper Motor
- Used Fiat Multipla Bumper
- Used Fiat Multipla Body Control Module
- Used Fiat Multipla Window Regulator
- Used Fiat Multipla Engine
Used egr valve for other Fiat models
Fitment questions
Does the Fiat Multipla actually have an EGR valve?
Yes, the Fiat Multipla was fitted with EGR valves on its diesel variants — specifically the 1.9 JTD engine — which used exhaust gas recirculation as part of its emissions management system. The petrol-engined Multiplas (1.6 and 1.8) do not use an EGR valve, so if you have a petrol model you won't find this part on your car. If you're unsure which engine you have, check your V5C or the engine code on the car before searching.
Will an EGR valve from an early Multipla fit a later one?
The Fiat Multipla ran from 1998 to 2004 in its first generation, with a significant facelift introduced in 2004 that continued until 2010 — and the 1.9 JTD diesel was available across both phases. Whether the EGR valve crosses that 2004 facelift boundary will depend on the exact engine code stamped on your unit, so confirm the code with the breaker against your registration before buying. Parts that look visually similar can differ in connector type or mounting, particularly across that generation change.
Does trim level affect which EGR valve I need for my Multipla?
No — trim level makes no difference to EGR valve fitment on the Multipla. What matters is your engine code and fuel type, not whether you have an Active, Dynamic, or Eleganza model. Confirm the engine code with the breaker to make sure you're getting the right part.
Does my Multipla's EGR valve depend on which year it was registered?
Yes, the year of registration matters because emissions regulations changed over the Multipla's production run, and the EGR system was calibrated accordingly. The key thing to match is the engine code rather than the year alone, as two cars from similar years can have different spec components if their engine codes differ. Always give the breaker your full registration so they can verify the correct part against your specific build.
Can I use a petrol Multipla EGR valve on my diesel, or vice versa?
No — the petrol-engined Multiplas (1.6 and 1.8) do not have EGR valves at all, so there is no petrol-to-diesel swap possible here. The EGR valve is a diesel-specific component on this model, fitted to the 1.9 JTD engine only. Make sure any part you're quoted is sourced from a diesel Multipla donor car.
What should I tell the breaker when asking for a Multipla EGR valve?
Give the breaker your registration number, your engine code (usually found on a sticker in the engine bay or on the engine block itself), and confirm it's the 1.9 JTD diesel — that's the variant this part applies to. The breaker can then cross-reference against their donor vehicle to check the codes match before you commit. Never assume a part fits based on year alone; engine code confirmation is the critical step here.