Get quotes for a used or replacement Fiat Ducato parcel shelf. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Used parcel shelfs vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
The Ducato has gone through several distinct generations: the second generation ran from 1994 to 2006, the third generation (X250 platform) ran from 2006 to 2014, and the fourth generation (X290) launched in 2014 and continues to the present day. The parcel shelf is body-specific, so getting the right generation is the single most important factor — a shelf from the wrong generation will not fit. Always match to your generation first, then check the other details below.
This crosses the X250-to-X290 generation boundary (2006–2014 into 2014-onwards), so these are different platforms with different body pressings. The shelf is very unlikely to be a straight swap, but confirm this against your registration with the breaker before purchasing, as they can check exact part references for both vehicles.
Yes, for a van like the Ducato these dimensions matter significantly for rear load-area trim and shelving — a short-wheelbase, low-roof van has a different rear interior profile to a long-wheelbase, high-roof variant. Always tell the breaker your wheelbase (L1, L2, L3 or L4) and roof height (H1, H2 or H3) alongside your registration so they can match the correct shelf.
Yes, this is an important fitment point — the parcel shelf or rear load-area trim can differ between barn-door and tailgate configurations because the aperture and surround geometry are different. Make sure you tell the breaker which rear-door setup your van has, as fitting the wrong type is likely to mean it won't locate or seal correctly.
Trim level itself does not determine fitment — what matters is the generation, wheelbase, roof height, and door configuration as described above. That said, higher-specification or conversion variants may have different upholstery colours or finishes on the shelf, so a used shelf from a different trim level should physically fit but may look slightly different to the rest of your interior.
The Ducato, Relay and Boxer are all built on the same shared platform within each generation (for example, all three share the X250 platform from 2006 to 2014), so there is a reasonable chance of interchange, but panel and trim differences between these badge-engineered siblings can vary. Confirm this directly with the breaker against your specific registration before assuming it will fit.