Used BMW Z4 Wheel Trims

The BMW Z4 has always been sold as a premium sports car and, across all generations, was fitted exclusively with alloy wheels as standard — steel wheels with plastic wheel trims were never part of the Z4's specification. If you're searching for wheel trims for a Z4, you are most likely actually looking for alloy wheels, centre caps, or alloy wheel refurbishment. Speak to a breaker about sourcing a used alloy wheel or a set of BMW centre caps, which are the closest equivalent item for this model.

Depending on what you need, the correct part is likely either a full alloy wheel, a BMW roundel centre cap (which fits into the centre of the alloy and carries the BMW logo), or a wheel arch trim/moulding if you're dealing with bodywork around the wheel. Alloy wheels on the Z4 did vary by generation — the E85/E86 (2002–2009) and the E89 (2009–2016) and the G29 (2018–present) each had different fitments — so make sure you confirm the generation and tyre size with the breaker against your registration. Never assume a wheel from one generation will bolt straight onto another without checking offset and PCD.

It is technically possible that a previous owner sourced aftermarket steel wheels and fitted plastic trims — this occasionally happens as a cheap winter-wheel setup — but this is not a factory BMW Z4 configuration and no OEM wheel trim was ever made for the Z4. If your car has steel wheels, these are non-standard and any trim you source would need to match the aftermarket wheel size, not a Z4-specific part. A breaker selling genuine Z4 parts will not have factory wheel trims, so confirm with them what you actually have on the car before ordering anything.

Yes, centre cap sizing can vary between the E85/E86, E89, and G29 generations, and even between different alloy wheel styles within the same generation, so the generation and the specific wheel design both matter. Always confirm the diameter of the centre cap opening on your existing wheel before buying — common BMW sizes exist but they are not universal across all models and years. Your breaker will need your registration or the wheel part number to make sure the cap fits correctly.