Need a used BMW 2 Series wheel trims? Request a free quote from UK vehicle dismantlers and compare offers direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Fitment on a used wheel trims varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:
Wheel trims (plastic hub caps covering a steel wheel) are only fitted to the BMW 2 Series on base-spec variants where steel wheels are standard — higher trim levels across all generations are typically fitted with alloy wheels from the factory. If your 2 Series came with alloys, there are no wheel trims to source. Check your existing wheels to confirm whether you have steel wheels with trims or alloy wheels before searching.
No — the F-series 2 Series (2014–2021, covering the F22 coupe and F45 Active Tourer) and the G-series 2 Series (2021 onwards, G42 coupe and G46 Active Tourer) are completely different generations with different steel wheel sizes and fitments, so trims are not interchangeable across that boundary. Even within a generation, the trim diameter must match your specific steel wheel size exactly. Confirm the wheel diameter and offset on your vehicle with the breaker before ordering.
Trim level itself does not affect wheel trim fitment — what matters is the size of the steel wheel fitted to your car, which can vary by generation and occasionally by engine variant. In practice, M Sport and higher trims almost always come with alloy wheels as standard, meaning those cars would never have had wheel trims fitted at all. Confirm with the breaker that you have steel wheels on your car and provide your registration so they can match the correct trim diameter.
The F45 Active Tourer ran from 2014 to 2021, with a facelift around 2018, but the underlying steel wheel specification did not change significantly at the facelift — so trim-to-trim fitment across that boundary is plausible. However, because breakers can sometimes supply trims from updated wheel specs, you should confirm the exact wheel diameter and part number with the breaker against your registration rather than assuming compatibility. Never guarantee fitment based on generation alone.
Wheel trims are sized to a specific diameter, but they also need to match the steel wheel's profile, the number of fixing points, and the centre bore to clip on correctly — so a 16-inch trim from a different BMW model may not seat properly even if the headline size matches. It is best to source trims specifically listed for the 2 Series generation you own rather than mixing across model lines. Ask the breaker to confirm the trim is from the correct model and generation for your car.
Wheel trims on the BMW 2 Series are generation-specific — the F22/F45 generation (2014–2021) and the G42/G46 generation (2021 onwards) use different body and wheel architectures, and trims are not designed to cross between them. Even within the F-series, differences in steel wheel sizing between body styles (coupe versus Active Tourer) mean you should always match the trim to the exact model. Provide your registration to the breaker so they can identify the correct trim for your specific car.