Used BMW X3 Brake Caliper
Need a used BMW X3 brake caliper? Request a free quote from UK vehicle dismantlers and compare offers direct.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
What to check when buying a used BMW X3 brake caliper
A used brake caliper that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:
- State whether it's front or rear, left or right
Other used BMW X3 parts
Used brake caliper for other BMW models
Fitment questions
Will a brake caliper from an E83 BMW X3 (2004–2010) fit my later F25 X3?
No – the E83 (2004–2010) and the F25 (2011–2017) are entirely different generations with different bodyshells, suspension geometry and brake assemblies, so the calipers are not interchangeable. Always source a caliper matched to your specific generation, and confirm with the breaker against your registration to be sure.
Does the engine size affect which brake caliper I need on a BMW X3?
Yes, it can – larger-engined X3s (for example, the 3.0-litre six-cylinder variants) were frequently fitted with bigger brake assemblies than the four-cylinder models in the same generation, so the calipers may differ in size and bolt pattern. When contacting a breaker, give them your exact engine size alongside your registration so they can match the correct caliper.
I have a 2014 F25 X3 – will a caliper from a pre-facelift 2012 F25 fit?
The F25 ran from 2011 to 2017 and received a facelift around 2014, but brake caliper compatibility across that facelift boundary is not something we can confirm as fact – changes to brake specs during a mid-generation refresh are possible. Give your registration to the breaker and ask them to verify the caliper matches your exact build date before buying.
Does the trim level affect which brake caliper fits my BMW X3 – for example, SE versus xLine or M Sport?
Trim level alone does not determine caliper fitment on the X3 – what matters is your generation and engine size, not whether your car is badged SE, xLine, M Sport or any other trim. Bear in mind that M Sport models may carry a different caliper finish or colour, so a used part could look different visually even if the specification is correct – confirm the mechanical spec with the breaker against your registration.
Do I need to specify NS or OS when buying a used X3 brake caliper?
Yes, absolutely – brake calipers are handed, meaning the nearside (NS, passenger side) and offside (OS, driver side) are mirror images of each other and are not interchangeable. Always tell the breaker which side you need, and double-check by comparing the bleed nipple and fluid inlet position on the replacement against your existing caliper.
Will a brake caliper from a G01 BMW X3 (2017 onwards) fit an earlier F25?
No – the G01 (2017 onwards) is a new generation with redesigned suspension and braking systems, so its calipers will not cross over to the F25 (2011–2017). Make sure any caliper you source is from the same generation as your car, and confirm full suitability with the breaker using your vehicle registration.