Used Audi 100 Front Cross Member
Get quotes for a used or replacement Audi 100 front cross member. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Other used Audi 100 parts
Used front cross member for other Audi models
Fitment questions
What years does the Audi 100 front cross member fit?
The Audi 100 ran across two well-established generations in the UK: the C3 (1982–1990) and the C4 (1991–1994). Cross members are generation-specific, so a C3 unit will not simply bolt onto a C4 shell or vice versa. Always quote your generation and registration to the breaker so they can match the correct unit.
Will a 1988 Audi 100 cross member fit a 1990 model?
Both the 1988 and 1990 cars sit within the C3 generation (1982–1990), so they share the same basic front subframe architecture. That said, engine size can influence the braking and suspension hardware mounted to the cross member, so confirm your engine variant with the breaker against your registration to be sure the donor car is a close enough match.
Does a C3 Audi 100 cross member fit a C4?
No — the C3 (1982–1990) and C4 (1991–1994) are distinct generations with different front-end geometry and mounting points, and parts do not cross over between them. Name your generation clearly when contacting a breaker, and confirm fitment against your specific registration before purchasing.
Does it matter whether my Audi 100 is a 1.8 or a 2.3 when buying a front cross member?
Engine size can matter for this type of part because larger, heavier engines sometimes required uprated braking and suspension components that bolt to the cross member, meaning the supporting structure may differ slightly between variants. Quote your exact engine size to the breaker and ask them to confirm the donor vehicle matches, rather than assuming any C3 or C4 unit will do.
Does the trim level — for example CD, CC, or E — affect which front cross member I need?
Trim level does not affect front cross member fitment on the Audi 100; the relevant factors are generation (C3 or C4) and engine size, not whether the car was a CD, CC, or E specification. You may find minor cosmetic differences around the front end depending on trim, but the structural cross member itself is determined by generation and drivetrain, not badge level.
Can I use a front cross member from an Audi 100 Avant on a saloon?
The Avant (estate) and saloon share the same front platform within each generation, so the front cross member should be the same component regardless of body style. Confirm the engine size of the donor Avant matches your own car, and ask the breaker to verify against both registrations before you commit to buying.
Fitment guidance is general and mistakes can happen - vehicle specifications vary and manufacturers make mid-production changes. Always confirm the exact part against your registration with the supplying breaker before buying.