Findapart

Cheap Alfa Romeo Brera Coil Pack

Get quotes for a used or replacement Alfa Romeo Brera coil pack. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

A buyer's guide to used Alfa Romeo Brera coil pack

No two coil packs are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:

Other used Alfa Romeo Brera parts

Used coil pack for other Alfa Romeo models

Fitment questions

Does the Alfa Romeo Brera actually have a coil pack?

Yes, but only on the petrol-engined variants — the 2.2 JTS and the 3.2 JTS V6 use individual coil-on-plug ignition coils, so buyers sometimes refer to these collectively as a coil pack. The 2.4 JTD and 2.0 JTDm diesel variants do not use spark plugs or ignition coils at all, so if you have a diesel Brera you will not find this part because it simply was not fitted. Check your V5 or run a VIN check to confirm whether you have a petrol or diesel engine before searching.

Will a coil pack from an early 2006 Brera fit my 2010 car?

The Alfa Romeo Brera ran as a single generation from 2005 to 2010, so there is no major model-generation boundary to cross. However, there were running production changes across that production run, so whether a coil from a 2006 car will directly swap with one from a 2009 or 2010 car depends heavily on the specific engine code — the 2.2 JTS and 3.2 JTS each have their own coil specification. Supply the breaker with your exact engine code (found on the V5 or via a VIN check) and they can cross-reference it against the donor vehicle to confirm compatibility.

Does the engine code matter when buying a used Brera coil pack, or is the year enough?

The engine code matters more than the year — the 2.2 JTS and 3.2 JTS V6 are completely different engines and use different ignition coils that are not interchangeable with each other. Year alone will not tell a breaker which coil you need, and getting the wrong one is a wasted journey. Find your engine code on the V5 registration document or ask a dealer or VIN-check service, and always quote it when requesting a quote on Findapart.

I have a Brera S — does the trim level affect which coil pack I need?

The Brera S is a higher-specification trim built around the 3.2 JTS V6 engine with Q4 four-wheel drive, and it is the engine code that determines the coil specification, not the S badge itself. If another petrol Brera shares the same engine code as your S, the coil is drawn from the same pool — trim differences like interior upgrades or bodywork styling have no bearing on the ignition system. Confirm the engine code with the breaker to make sure you are matched to the right donor vehicle.

How many coils does a Brera need — can I just replace one, or do I need a full set?

The 2.2 JTS has four cylinders and therefore four individual coil-on-plug units, while the 3.2 JTS is a V6 with six. You can replace a single failed coil rather than a full set, and buying one used coil from a breaker is a common and cost-effective approach. That said, if the car has high mileage and one coil has failed, some owners choose to replace all of them at once to avoid repeat visits — discuss this with your mechanic before ordering.

Does it matter whether my Brera has a manual or automatic gearbox when buying a coil pack?

Gearbox type does not affect the ignition coil specification — the coils are determined entirely by the engine, not by how the drive is transmitted. Whether your Brera has the six-speed manual or the Q-Tronic automatic, the coil pack for a given engine code will be the same. Focus on matching the engine code when requesting quotes, and you can disregard the gearbox entirely for this particular part.