Used Alfa Romeo 156 Bonnet Strut

The Alfa Romeo 156 uses a traditional bonnet prop rod rather than gas-charged bonnet struts, so there is no bonnet strut to source for this model. If your bonnet is not staying up, the part you are likely looking for is the bonnet prop rod or its retaining clip, both of which your breaker should be able to help with. You may also want to check the bonnet hinge and catch mechanism if you are having support issues.

On the Alfa Romeo 156, the bonnet is held open manually using a metal prop rod that slots into a hole in the bonnet, rather than any gas strut system. Search for 'Alfa Romeo 156 bonnet prop rod' or simply ask your breaker for the bonnet stay rod, and they will know what you mean. A used example from a 156 at a dismantler is the correct route, as this is a model-specific part.

Because the 156 does not use bonnet struts at all, there is no strut from any other Alfa model that would be applicable here. The 156 relies on a prop rod arrangement, so fitting a gas strut from another vehicle would not be a straightforward or appropriate substitution. Focus your search on the correct prop rod for the 156 rather than struts from other models.

The bonnet prop rod on the Alfa Romeo 156 is a shared component across the range and is not affected by trim level, so a rod from a Lusso, Veloce, or Sportwagon variant should all be equivalent for this purpose. Trim level does not influence bonnet hardware fitment on this model. Ask your breaker to confirm against your registration to be safe, but trim is not expected to be a differentiating factor here.

The Alfa Romeo 156 ran from 1997 to 2005, with a facelift introduced in 2002 that brought changes to the front-end styling including the bonnet, lights, and grille. While the prop rod itself is a simple mechanical component, it is worth confirming with your breaker whether the rod from a pre-facelift car is identical to that of a facelifted one, as bonnet panel geometry can vary slightly across a facelift. Quote your registration to your breaker so they can check the part against the correct bonnet profile for your car.