Get quotes for a used or replacement Volkswagen Touran glove box. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Yes, the year matters because the Touran was sold in two distinct generations in the UK: the Mk1 (2003–2015, with a facelift around 2010) and the Mk2 (2015 onwards). A glove box from the Mk1 will not be a straightforward swap into a Mk2 as the dashboard architecture changed between generations, and vice versa. Stick to sourcing within the same generation as your car, and if you are shopping near the 2010 facelift boundary within the Mk1, confirm with the breaker whether the specific part crosses that refresh.
Both a 2008 and a 2013 Touran fall within the Mk1 generation (2003–2015), so they share the same broad dashboard generation, which is a good starting point. However, the Mk1 received a facelift around 2010 which brought interior trim updates, so a 2008 (pre-facelift) glove box may differ in finish or fitment detail from a 2013 (post-facelift) one. We would recommend confirming with the breaker that the part matches your specific pre- or post-facelift dashboard before buying.
Trim level can affect interior styling on the Touran, so while the basic glove box aperture in the dashboard is generation-specific rather than trim-specific, the glove box lid and surround finish may differ between trim levels such as S, SE, and SEL. If you are after an exact colour or material match, let the breaker know your trim level so they can supply a visually compatible unit. Fitment in terms of physical installation should be fine within the same generation, but cosmetic differences are possible.
Yes – alongside the year, it helps to tell the breaker your trim level (S, SE, SEL or equivalent) so they can match the finish as closely as possible, since interior colour and material can vary. The Touran's engine does not affect glove box fitment, so you do not need to mention that. Providing your registration is always a good idea so the breaker can cross-reference the exact specification of your car.
Yes, the Mk2 Touran (2015 onwards) has a redesigned interior compared to the Mk1 (2003–2015), meaning the dashboard and glove box are not interchangeable between the two generations. If your car is a Mk2, make sure you source a glove box specifically from another Mk2, and mention your trim level to the breaker to get the best finish match. Do not assume a Mk1 part will fit even if it looks similar in photographs.
A glove box is a standard interior fitting on all variants of the Volkswagen Touran across both the Mk1 (2003–2015) and Mk2 (2015 onwards) generations, regardless of engine or drivetrain. There are no known variants where the glove box was deleted or replaced with an alternative storage arrangement as a factory option. If your glove box is missing, it is most likely been removed by a previous owner or damaged, and a used replacement from a breaker is a practical solution.