Compare prices on a used Volkswagen Passat brake discs from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Fitment on a used brake discs varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:
The B6 and B7 are separate generations with different brake specifications, so discs from a B6 will not reliably cross over to a B7 without verification. Both generations also saw engine-dependent disc sizing, meaning a 2.0 TDI car may carry larger discs than a 1.6 TDI even within the same generation. Always confirm the exact part against your registration with the breaker before buying.
Yes, engine size is one of the key factors for brake disc fitment on the Passat — larger or more powerful engines typically use bigger, heavier-duty discs to handle the extra stopping demands. A 2.0-litre or 3.2 V6 variant will generally have larger diameter discs than a 1.4 or 1.6-litre model, even within the same generation. Always tell the breaker your exact engine size and registration so they can match the correct disc diameter and specification.
Trim level alone — whether S, SE, SEL, or R-Line — does not determine brake disc fitment on the Passat; it is generation and engine size that matter most. That said, cosmetic differences such as different wheel sizes associated with certain trims can sometimes correspond with different disc sizes, so if your car has non-standard wheels it is worth mentioning to the breaker. Confirm the correct disc size against your registration rather than relying on trim name alone.
The B5 Passat ran from 1996 to 2000, with the facelifted B5.5 following from 2000 to 2005, and there can be differences in brake specifications across that boundary. Whether a specific disc from a pre-facelift B5 will cross over to a B5.5 depends on the engine variant and exact specification, so treat them as potentially different fitments. Confirm the part number and disc diameter with the breaker against your registration before purchasing.
The Passat was offered in both front-wheel-drive and 4Motion (four-wheel-drive) variants, and brake disc specifications can differ between the two layouts, particularly at the rear. If the donor car is a 4Motion and your car is a standard front-wheel-drive Passat (or vice versa), do not assume the rear discs will interchange. Always check the drivetrain type of the donor vehicle with the breaker and confirm compatibility against your exact registration.
The B8 Passat, which launched in 2015, is a significant platform change from the B7 (2010–2015) and uses different brake specifications that are not simply interchangeable with earlier generations. Disc diameter and hub dimensions changed with the new platform, making cross-generation swaps unlikely to work without careful verification. Give the breaker both the year and engine size of your B8 and confirm no earlier-generation parts are being supplied as a match.