Used Vauxhall Meriva Power Steering Pump

It depends on the generation. The original Meriva A (2003–2010) used hydraulic power steering on most variants, meaning it does have a physical power steering pump. The Meriva B (2010–2017) switched to electric power steering (EPS) on the majority of variants, so those models have no hydraulic pump at all — if your Meriva B feels heavy or is giving steering faults, the issue is more likely the electric power steering motor or control module rather than a pump.

The Meriva A, built from 2003 to 2010, is the generation most likely to carry a conventional hydraulic power steering pump. If your car is a Meriva B (2010 onwards), it almost certainly uses electric power steering and there is no hydraulic pump to replace — confirm which generation you have by checking the registration against the DVLA record or the VIN plate before ordering.

Both years fall within the Meriva A generation (2003–2010), so there is a reasonable chance of compatibility, though fitment can vary with engine size — a 1.4 petrol and a 1.7 CDTi diesel, for example, may use different pump specifications. Confirm the engine code on your car matches that of the donor vehicle, and check this with the breaker against your registration before purchasing.

No, trim level does not affect which power steering pump is fitted — the pump is determined by the engine and generation, not whether the car is a Life, Club, or Active. You may find minor cosmetic differences between cars of different trim levels when collecting the part, but these are irrelevant to fitment, so focus on matching the engine size and engine code instead.

2010 is the changeover year between the Meriva A and the Meriva B, so it could be either — early 2010 cars are likely Meriva A with hydraulic steering, while later 2010 registrations may be Meriva B with electric power steering. Check your VIN or ask the breaker to confirm which generation your specific registration falls into before ordering any steering components.

Different engine sizes can require different pump flow rates and mounting configurations, so a direct swap between a 1.4 and a 1.6 Meriva A pump is not guaranteed even within the same generation. Match the engine code as well as the engine size, and confirm compatibility with the breaker against your exact registration to avoid buying a part that will not fit.