Compare prices on a used Vauxhall Meriva egr valve from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
A used egr valve that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:
EGR valves are fitted to diesel-engined Merivas and also to some petrol variants, so the part does exist on this model across certain engine codes. Diesel engines such as the 1.3 CDTi and 1.7 CDTi will have an EGR valve as standard, and some petrol engines also use one for emissions control. When searching, always lead with your engine code rather than just the fuel type, as different CDTi units use different valves.
The Meriva ran in two distinct generations: the Meriva A (2003–2010) and the Meriva B (2010–2017), which was a substantially different vehicle with a different body and revised engine lineup. The EGR valve design follows the engine code and emissions era, and these two generations used different engine families, so a straight swap across that 2010 boundary is very unlikely to work. Always confirm the engine code from your V5C or registration plate with the breaker before ordering.
No — trim level has no bearing on EGR valve fitment for the Meriva. Whether your car is an Expression, Exclusiv, SE, or any other trim, what matters is the engine code and the emissions standard the engine was built to. A breaker will match the part to your engine code, not your trim badge.
Both years sit within the Meriva B generation (2010–2017), so fitment is plausible if the engine codes match, but you should also consider whether there were any running changes to the emissions calibration between those build years. Check the engine code stamped on your engine or listed on your V5C and give that to the breaker alongside your registration, as minor revisions within a generation can affect which valve is compatible.
Engine displacement alone isn't enough to guarantee a match on the 1.3 CDTi, as the engine code suffix and the emissions standard (Euro 4, Euro 5, and so on) both influence which EGR valve was fitted. The Meriva B moved through different emissions tiers across its 2010–2017 run, and a valve from the wrong era may not seal or calibrate correctly. Give the breaker your full engine code and registration so they can identify the correct unit for your specific build.
It is possible that Vauxhall used shared engine families across models such as the Corsa, Astra, or Zafira, meaning an EGR valve from one of those vehicles might share the same part number as the one fitted to your Meriva. However, whether a specific valve from a different model genuinely crosses over depends on the exact engine code, build date, and emissions calibration, so this is something to confirm directly with the breaker rather than assume. Always provide your registration and engine code to help them verify compatibility before purchase.