Vauxhall Crossland Rear View Mirror Replacement Parts

The Crossland (sold in the UK as the Crossland X from 2017 before being renamed simply Crossland from around 2021) went through a facelift that updated both the interior and exterior styling, so a mirror from a pre-facelift car may differ in shape, mounting point, or built-in features from a post-facelift one. You should tell the breaker your exact registration so they can confirm the mirror is from the same generation and body revision as your car. Never assume a mirror will swap across a facelift boundary without checking.

Yes, all standard Vauxhall Crossland variants were fitted with a conventional interior rear view mirror mounted to the windscreen; it is a genuine, replaceable part. Some higher-spec or optional-equipment cars may have an auto-dimming function built into the mirror, so the mirrors are not always identical across the range. When sourcing a used one, confirm with the breaker whether your original has auto-dimming or not, as the two are not directly interchangeable.

Trim level can make a difference here because higher trims such as Elite or Ultimate were more likely to feature an auto-dimming rear view mirror, while entry trims like SE or SE Nav typically had a standard manual mirror. The physical mounting and glass shape are broadly the same, but if your car has an auto-dimming mirror it will have an electrical connector that a plain mirror will not, so you need to match like for like. Tell the breaker your trim level and whether your current mirror has any wiring attached, and they will be able to source the correct unit.

The 2021 rename coincided with updated interior styling on the Crossland, and the windscreen header area and mirror mounting were revised, so a mirror from a pre-2021 Crossland X and one from the later Crossland may not be a direct swap. This is a known boundary you should treat with caution — confirm with the breaker that the donor car shares the same generation specification as yours before purchasing. Providing your registration to the breaker is the safest way to verify compatibility.

Yes, if your mirror houses additional electronics such as a HomeLink transmitter or a microphone for the hands-free system, it is a more complex unit than a plain mirror and you must source a replacement with the same features, as they are wired differently. Let the breaker know exactly what functions your mirror contains by describing any buttons, lights, or connectors on the unit. A standard mirror will physically fit the same mounting point but will not restore those electronic functions.

No — the engine and gearbox have no bearing on which interior rear view mirror your Crossland needs. Fitment is determined by the generation of the car and the specification level of your mirror (for example, plain versus auto-dimming), not by what is under the bonnet. Focus your search on matching the trim and build date rather than the engine variant.