Vauxhall Crossland Bumper Replacement Parts

The Crossland (sold in the UK as the Crossland X from 2017, then rebadged simply as Crossland from 2021) received a facelift for the 2021 model year, which brought revised front and rear bumpers along with updated lights and grille. Bumpers from pre-facelift cars (2017–2020) should be compatible with other pre-facelift cars, and post-facelift bumpers (2021 onwards) should match other post-facelift cars. Always confirm the exact interchange with the breaker using your registration, as panel changes can occur mid-production year.

Your 2019 car is pre-facelift and your 2022 is post-facelift, and these sit either side of the 2021 facelift boundary that brought new front-end styling to the Crossland. Because bumpers, lights and grilles typically change at a facelift, a direct swap across that boundary is unlikely without visible mismatches. Confirm with the breaker whether the specific part numbers interchange before purchasing.

No — engine choice and trim level do not affect bumper fitment on the Crossland; the bumper shell is shared across SE, SE Nav, Elite and Elite Nav trims within the same facelift period. You may find cosmetic differences such as different fog-light bezels, trim finishers or sensor hole configurations depending on the spec the donor car was built to, so mention your trim to the breaker so they can match the details. The key questions are always the model year and whether the car is pre- or post-facelift.

The facelift arrived for the 2021 model year, so a 2021 car could be either generation depending on exactly when it was registered and built. The safest approach is to give the breaker your full registration number so they can check the build date and confirm which bumper style your car left the factory with.

The Crossland X name was used up to the 2021 rebrand, and the rebrand coincided with the facelift that updated the front end, so a Crossland X bumper from pre-2021 is unlikely to match a post-facelift car without noticeable differences in fit and appearance. Confirm the part numbers with the breaker against both registrations before committing to a purchase.

The bumper shell itself is the same regardless of whether parking sensors are fitted, but you will need a shell that has the correct number of sensor holes pre-cut — or one that can be drilled — to match your car's setup. Let the breaker know how many sensors your bumper has so they can supply a suitable panel; this is a fitment detail to confirm with them rather than something that changes the generation or facelift compatibility.