Vauxhall Crossland X Wiper Blades Replacement Parts

The Vauxhall Crossland X ran from 2017 through to around 2021, and wiper blades are fitted to all variants, so this is a reasonable thing to check. Wiper blade fitment is primarily determined by the blade lengths specified for the model, and the Crossland X did not receive a fundamental change to its windscreen or wiper arm attachment points that would block interchange across that period. That said, confirm the blade arm fitment type and lengths match your registration before buying from a breaker, as minor running changes can occur.

These are different Vauxhall models with different body designs, and the windscreen dimensions and wiper arm attachment styles are not guaranteed to be shared between them. Even where parts look similar, blade lengths and hook fittings can differ, so a Mokka or Mokka X blade should not be assumed to fit the Crossland X. Ask the breaker to check the blade lengths and arm attachment type against your Crossland X registration before purchasing.

Trim level does not affect wiper blade fitment on the Crossland X — the windscreen and wiper arm specification is the same across SE, Elite, and Ultimate trims. You may find that higher trims were supplied with flat aero-style blades from the factory rather than traditional bracket blades, which is a cosmetic and performance difference rather than a fitment one, so check which style you currently have. A used blade set from any trim should fit any other trim as long as the arm attachment type and blade lengths match.

The Crossland X is a crossover with a rear wiper as standard, so a used rear blade is a legitimate thing to source from a breaker. Rear wiper blade fitment depends on the arm pin or hook type and the blade length, which vary between Vauxhall models, so a rear blade from a Mokka X or Astra K should not be assumed to be a direct swap. Confirm the attachment type and blade length against your registration with the breaker before agreeing a purchase.

The Crossland X received a facelift in 2020, but this was largely focused on exterior styling details and interior updates rather than changes to the windscreen or wiper system. Wiper blade lengths and arm fittings are generally expected to remain consistent across the pre- and post-facelift car, but because this is a cross-generation boundary question, confirm with the breaker that the blade lengths and arm attachment type match your specific registration rather than assuming they interchange.

The Crossland X typically uses a driver's side (OS) blade of around 600mm and a passenger's side (NS) blade of around 400mm, though you should verify this against your specific registration as sizes can vary. When sourcing from a breaker, the key is matching blade length and the arm attachment type — hook, pin, or bayonet — rather than finding blades from the exact same model year. A breaker familiar with the Crossland X will be able to confirm both dimensions and the fitting style before supplying.