Cheap Vauxhall Astra Body Control Module
Get quotes for a used or replacement Vauxhall Astra body control module. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Buying a used Vauxhall Astra body control module: what matters
Fitment on a used body control module varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:
- State your VIN or engine code if known
Other used Vauxhall Astra parts
- Used Vauxhall Astra Wiper Blades
- Used Vauxhall Astra Heater Motor
- Used Vauxhall Astra Fuse Box
- Used Vauxhall Astra Central Locking Motor
- Used Vauxhall Astra Steering Column
- Used Vauxhall Astra Headlight
- Used Vauxhall Astra Shock Absorber
- Used Vauxhall Astra Anti Roll Bar
- Used Vauxhall Astra Aerial
- Used Vauxhall Astra Wishbone
- Used Vauxhall Astra Fog Light
- Used Vauxhall Astra Spoiler
Used body control module for other Vauxhall models
Fitment questions
Does the Vauxhall Astra have a Body Control Module?
Yes, the Vauxhall Astra does have a Body Control Module (BCM), which manages a range of electrical functions including lighting, wipers, central locking, and the instrument cluster. It is fitted across all main engine and trim variants of the Astra, so it is not restricted to a particular drivetrain or engine type. If your Astra is showing multiple electrical gremlins at once, a faulty BCM is a common culprit worth investigating.
Will a BCM from a 2012 Astra fit my 2015 Astra?
This is an important boundary to be aware of: the Astra J ran from 2009 to 2015, with a facelift in 2012, so a 2012 and a 2015 car are both Astra J but from different facelift phases. The BCM is closely tied to the vehicle's software architecture and option content, so even within the same generation the pre- and post-facelift modules may differ. You should confirm with the breaker that the donor car's exact build spec and software version are compatible with your registration before buying.
Does the trim level affect which BCM I need — for example, will an SE BCM fit a Sri or Elite?
Trim level can affect the BCM on the Astra because the module is programmed to manage whichever features and options are fitted to that specific car — for example, a higher-spec Elite may have features such as adaptive lighting or heated seats that a base SE does not. Unlike a purely mechanical part, the BCM's firmware and configuration matter as much as the physical unit. Confirm with the breaker that the donor vehicle's trim and options closely match your own car's spec before purchasing.
Does it matter which engine my Astra has when sourcing a second-hand BCM?
The engine type itself is not usually the primary factor when matching a BCM, but the ancillary systems associated with different engines — such as stop-start, different alternator management, or turbocharged engine controls — can influence the module's programming. A petrol and a diesel Astra J of the same trim and build date may therefore use differently configured BCMs. Always quote your full registration to the breaker so they can match the donor car as closely as possible to your own vehicle.
Can I use a BCM from an Astra K in an Astra J?
No — the Astra J (2009–2015) and the Astra K (2015–2022) are entirely different generations with different electrical architectures, connectors, and software platforms, so their BCMs are not interchangeable. Always source a BCM from the same generation as your car. Confirm the exact year and build of the donor vehicle with the breaker to make sure you are getting the right unit.
Do I need to have the BCM coded after fitting a used one from a breaker?
Yes, in almost all cases a second-hand BCM will need to be programmed or coded to your vehicle using specialist diagnostic equipment, as the module stores vehicle-specific data including VIN information and the configuration of fitted options. Fitting and coding is typically carried out by a Vauxhall dealer or a good independent specialist with Tech2 or equivalent diagnostic tools. Factor this into your budget when buying from a breaker, as the part cost alone does not cover the full job.