Findapart

Škoda Kamiq Sump Replacement Parts

Compare prices on a used Škoda Kamiq sump from UK breakers. Free part request, no obligation.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

Choosing the right used Škoda Kamiq sump

Used sumps vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:

Other used Škoda Kamiq parts

Used sump for other Škoda models

Fitment questions

Will a sump from a 2020 Škoda Kamiq fit my 2023 Kamiq?

The Kamiq has been sold in the UK from 2019 onwards as a single generation, with a facelift arriving in 2021, so a 2020 unit sits pre-facelift and a 2023 unit is post-facelift. Because the sump follows the engine code rather than the model year, the critical step is confirming both cars share the same engine code — check your V5 or run a VIN check to find it. Crossing the 2021 facelift boundary may or may not affect sump compatibility depending on whether ancillary or mounting points changed at that point, so confirm this directly with the breaker against your registration before buying.

Does engine code matter when buying a used Kamiq sump, or can I just match the year?

Engine code matters far more than year for a mechanical part like a sump — two Kamiq models from the same year can carry different engines and have completely different sumps. Check your V5 logbook or use a VIN check service to find your exact engine code, then supply that code to the breaker when you request a quote. Matching on year alone risks ordering a sump that will not seal or bolt up correctly.

Does it matter whether my Kamiq is SE, SE Drive, or Monte Carlo trim when sourcing a sump?

No — SE, SE Drive, and Monte Carlo are trim levels that affect interior specification and cosmetic features, none of which have any bearing on the sump. What determines sump compatibility is the engine code, fuel type, and gearbox type, so a sump pulled from a Monte Carlo will fit an SE if the engine codes match. The only cosmetic difference you might notice on a used part is general wear or surface finish, but this has no effect on function.

I have a 1.0 TSI petrol Kamiq — will a sump from a 1.5 TSI Kamiq interchange?

No, the 1.0 TSI and 1.5 TSI are different engine families and their sumps are not interchangeable. Always match the sump to the specific engine code on your V5 rather than to the broader petrol or diesel fuel type. Supply your exact engine code to the breaker so they can pull the correct unit from their stock.

Can a sump from a diesel Kamiq fit a petrol Kamiq?

No — diesel and petrol engines in the Kamiq are entirely different units with different sump profiles, capacities, and bolt patterns, so the parts are not interchangeable. You need to match the sump to your exact engine code, which you can find on your V5 or via a VIN check. Always give the breaker your engine code rather than just stating petrol or diesel, as there are multiple variants within each fuel type.

Is a used Kamiq sump from a breaker a reliable buy, and what should I check?

A used sump from a reputable UK breaker can be a cost-effective option, provided the part is matched to your engine code and has been inspected for cracks, corrosion around the drain plug thread, and damage to the mating face. Ask the breaker to confirm the mileage of the donor vehicle and whether the sump was removed cleanly without impact damage. Never guarantee a used part will be perfect, but a good breaker will advise you honestly and may offer a short warranty on the unit.