Get quotes for a used or replacement Škoda Roomster fuel injection pump. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Used fuel injection pumps vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
The engine code is the single most important detail for matching a fuel injection pump — it tells a breaker exactly which pump variant was fitted, regardless of what badge or trim level your Roomster wears. You'll find the engine code on your V5C logbook or via a VIN check. Always give this code to the breaker before agreeing a price, as two Roomsters of the same year and fuel type can carry different engine codes requiring different pumps.
The Škoda Roomster had a single generation running from 2006 to 2015, with a facelift in 2010, so a 2007 and a 2010 car sit either side of that facelift boundary. If both cars share the same engine code, the pump itself may well interchange, but ancillary fittings and mounting details can change across a facelift — confirm with the breaker against both registrations before buying. Never assume fitment based on year alone without matching engine codes first.
Trim level does not affect fuel injection pump fitment — what matters is the engine code, fuel type, and gearbox type, not whether the car is a Scout or a base-grade Roomster. The Scout trim brought visual and ride-height differences but used the same mechanical powertrain options as the wider Roomster range, so the pump follows the engine, not the badge. Do expect cosmetic differences such as underbody cladding if you're removing or refitting ancillary parts during the job.
Škoda, VW, SEAT, and Audi shared engines across the VAG group during the Roomster's 2006–2015 production run, so a pump from a matching engine code in another VAG model can sometimes interchange. The key is matching the exact engine code — not the brand or model — and confirming displacement, output variant, and gearbox type all align. Route this question to the breaker with both engine codes, as injection pump variants can differ even within the same engine family depending on the vehicle it was calibrated for.
No — petrol and diesel injection systems are completely different and the parts will not interchange under any circumstances. Diesel Roomsters used high-pressure common-rail or pump-injector systems depending on the engine code, while petrol variants used a lower-pressure port or direct injection setup. Always confirm your fuel type and engine code with the breaker at the very first point of contact.
This is a genuine concern with used injection pumps and one you must raise directly with the breaker and your fitting garage before purchasing. Some pump and ECU combinations require coding or immobiliser adaptation to the receiving vehicle, and whether that applies to your specific engine code is something we cannot confirm as fact here. A breaker experienced with VAG diesel systems should be able to advise, and a specialist VAG technician can carry out any required coding once the part is fitted.