Findapart

Škoda Kodiaq Air Flow Meter Replacement Parts

Get quotes for a used or replacement Škoda Kodiaq air flow meter. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

A buyer's guide to used Škoda Kodiaq air flow meter

No two air flow meters are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:

Other used Škoda Kodiaq parts

Used air flow meter for other Škoda models

Fitment questions

Does the Škoda Kodiaq have an air flow meter?

Yes, the Kodiaq does use a mass air flow (MAF) sensor on its petrol and diesel engine variants — it measures the volume of air entering the engine so the ECU can calculate the correct fuelling. All mainstream Kodiaq engines are turbocharged, so a MAF sensor is present across the range. If you have been told yours is faulty, it is a genuine and commonly replaced part on this model.

Will a Kodiaq air flow meter from a 2017–2021 car fit my 2022-onwards facelifted Kodiaq?

The Kodiaq ran in its first generation from 2017 to around 2021, with the heavily revised second-generation model arriving from 2023 onwards — there is also a mid-cycle refresh within the first generation to be aware of. Engine codes are your best guide here: if the engine code on your V5 matches the donor car exactly, fitment is far more likely, but crossing a generation boundary like this carries real risk of subtle differences in the MAF sensor specification or connector type. We would always recommend you confirm the engine code and registration details with the breaker before purchasing.

Does it matter which trim level my Kodiaq is — for example, will a SE air flow meter fit an SE L or a Sportline?

Trim level makes no difference to air flow meter fitment on the Kodiaq — SE, SE L, Sportline, Laurin & Klement, and Edition trims all share the same mechanical underpinnings for a given engine variant. The part that matters is the engine code stamped on your V5 or confirmed via a VIN check, not the badge on the tailgate. Give the breaker your engine code and they can match the correct MAF sensor regardless of trim.

I have a 2.0 TDI Kodiaq — does it matter whether mine is a DSG or a manual when buying a used air flow meter?

For the air flow meter itself, gearbox type does not directly affect which sensor is fitted — the MAF measures intake air and is tied to the engine code rather than the transmission. That said, always supply your full engine code to the breaker, as there can be more than one 2.0 TDI variant across the Kodiaq's production run with slightly different specifications. Confirming both the engine code and the model year gives the breaker the best chance of finding you a correctly matched part.

Can I use an air flow meter from a VW Tiguan or SEAT Ateca on my Škoda Kodiaq?

Because the Kodiaq shares the MQB platform with the Tiguan, Ateca, and several other VAG group models, MAF sensors are often shared across these vehicles when the engine codes match — this is a route many buyers and breakers use to find good-used stock. The key is to match engine codes exactly rather than going by model name alone, as the same code fitted to a Tiguan and a Kodiaq will typically use the same sensor. Confirm the cross-compatibility with the breaker using both vehicles' engine codes before buying.

Does it matter whether my Kodiaq is front-wheel drive or four-wheel drive (4x4) when choosing an air flow meter?

No — the drive configuration of your Kodiaq does not affect which air flow meter is fitted, as the MAF sensor is determined entirely by the engine, not by whether drive goes to two or four wheels. Whether your Kodiaq is the standard FWD version or the 4x4 variant with DSG, the sensor specification follows the engine code. Quote your engine code to the breaker and they will be able to identify the correct part regardless of drivetrain layout.