Findapart

Peugeot 306 Dashboard Replacement Parts

Get quotes for a used or replacement Peugeot 306 dashboard. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

Choosing the right used Peugeot 306 dashboard

Used dashboards vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:

Other used Peugeot 306 parts

Used dashboard for other Peugeot models

Fitment questions

Will a dashboard from an earlier 306 fit my later one – does the year matter?

The Peugeot 306 ran from 1993 to 2002 and received a significant facelift in 1997, which changed the dashboard design, so a pre-1997 dashboard is not directly interchangeable with a post-1997 one. Within each generation – pre-facelift (1993–1997) and facelift (1997–2002) – dashboards are generally compatible, but always confirm the exact part against your registration with the breaker before buying.

Does a dashboard from a 1996 306 fit a 1998 306?

These two cars sit either side of the 1997 facelift, which updated the interior including the dashboard, so they are unlikely to be a straight swap. Confirm with the breaker whether the part number matches your post-1997 car before committing, as fitting an incorrect dashboard can be a significant job to undo.

Does the trim level affect which dashboard I need – will an XR or XT dash fit my XSi?

The core dashboard structure is the same across 306 trim levels within the same generation, but you may find differences in switch blanks, finisher colours, and the provision for additional instruments depending on the original trim. Check with the breaker that the dashboard has the correct cut-outs and fittings for your trim's switch and instrument layout to avoid needing to swap over additional panels.

Does it matter whether my 306 is a 3-door or 5-door when buying a used dashboard?

The dashboard itself spans the full width of the cabin and is shared regardless of door count, so a 3-door or 5-door origin should not affect fitment of the dashboard assembly. That said, always confirm with the breaker using your registration to rule out any variant-specific differences.

Does the engine type affect which 306 dashboard I need?

No – the engine fitted to your 306 does not affect dashboard fitment, so you do not need to match petrol to petrol or diesel to diesel when sourcing this part. What matters is the generation (pre- or post-1997 facelift) and the trim level's switch and vent layout, so focus on those when speaking to a breaker.

Are there any safety concerns I should know about when fitting a used 306 dashboard?

If your dashboard has an integrated airbag or is associated with the SRS system, this is safety-critical – airbags and pretensioner seatbelts are single-use components and must not be reused after deployment, and professional fitting is strongly recommended. You should also confirm airbag module compatibility with your specific SRS system directly with the breaker against your registration, as this is not something that can be assumed from the car's age or trim alone.