Cheap Nissan Vanette Fog Light

Fog lights were available on some Vanette variants depending on specification, but they were not a standard fitting across all versions — many base-spec Vanettes left the factory without front or rear fog lights at all. If your Vanette has a blanking plate where a fog light would sit, or no fog light aperture in the bumper, the vehicle was not originally fitted with one. Check your existing bumper and wiring before ordering a used fog light unit, as you may need additional wiring and a switch as well as the light itself.

The Vanette went through distinct generations — the C22 series ran broadly through the 1980s into the early 1990s, and the C23 series followed into the mid-to-late 1990s — and front-end components including fog lights and bumpers are generally not shared between these generations. Within the same generation, minor facelifts can also change the bumper design and any integrated fog light position or fitting, so a pre-facelift fog light may not clip into a post-facelift bumper without modification. Always confirm the exact year of the donor vehicle against your registration with the breaker before buying.

For front-end parts like fog lights, body length, roof height and the number of side doors do not affect fitment — the front bumper and any associated fog light position are shared across van, combi and minibus body styles within the same generation. What matters is the generation (C22 or C23) and whether there has been a facelift that changed the front bumper design. Tell the breaker your registration and confirm the donor vehicle's year so they can match the correct front-end specification.

No — engine size, whether petrol or diesel, and transmission type have no bearing on fog light fitment, as the fog light is a front-end panel component that is the same regardless of what is under the bonnet. The key variables are the generation and the specific bumper design fitted to your vehicle's build date. Confirm the part against your registration with the breaker rather than relying on engine code alone.

Trim level can affect whether a fog light was fitted as standard, but it does not change the design or fixing points of the fog light unit itself — if two Vanettes of the same generation share the same bumper, the fog light will be the same part regardless of specification. The main practical difference you might find is that a higher-spec van has wiring and a switch already in place, whereas a lower-spec vehicle may need these added. Confirm with the breaker that the donor vehicle's fog light matches your bumper aperture and generation.

The C22 and C23 generations each had running production changes that could affect front bumper design and the way fog lights mount or integrate into the bumper, meaning a pre-facelift unit may not fit cleanly into a later bumper. Naming an exact facelift year with confidence is difficult for the Vanette given its relatively limited UK documentation, so rather than risk buying the wrong part, describe your bumper shape and your vehicle's registration to the breaker — they can check the donor vehicle's year and bumper type against yours before the part is dispatched.