Cheap Nissan 350Z Seat

The 350Z ran from 2003 to 2009, with a facelift introduced for the 2006 model year, so a pre-facelift (2003–2005) seat and a facelift (2006–2009) seat sit across a known generation boundary. Interior trim and seat mounting points can differ across that boundary, so confirm with the breaker whether the specific seat they have will match your car's fixings and side-airbag wiring before buying. Never assume a cross-facelift swap is a straightforward fit.

Year matters because there is a facelift boundary at 2006, after which seat design, trim finishes, and potentially airbag integration may differ from the earlier 2003–2005 cars. Try to source a seat from the same side of that boundary as your car, and confirm the exact year of the donor vehicle with the breaker against your registration. The engine variant makes no difference to seat fitment.

Yes, trim level is one of the key factors for 350Z seats, as higher-spec trims such as the GT and Touring Sport were fitted with different seat styles – including sports bucket seats on some variants – compared with lower-specification cars. If the seat style does not match your original trim, it may still physically fit the mounting points, but you should expect cosmetic and comfort differences and potentially different side-airbag wiring harnesses. Always tell the breaker your trim level and confirm the donor car's trim so you know what you are getting.

Driver's (OS – offside) and passenger's (NS – nearside) seats are not interchangeable on the 350Z; they are handed, and the side-airbag module is built into the outboard side of each seat. Always order the correct side to match the seat you are replacing, and confirm the side clearly when requesting a quote from the breaker.

Yes – 350Z seats contain a side-impact airbag and the car also uses pretensioner seat belts, both of which are safety-critical and single-use items that must not be reused after deployment. When buying from a breaker, confirm that neither the seat airbag nor the pretensioner has been deployed, and have a qualified technician check compatibility of the airbag module with your car's specific SRS system before fitting. Professional installation is strongly recommended for any seat containing a live airbag.

Engine type has no bearing on seat fitment for the 350Z – what matters is the model year (and which side of the 2006 facelift the donor car sits on), the trim level, and the side (NS or OS) of the seat. You can safely disregard engine variant when searching, but do confirm year and trim with the breaker against your registration to make sure the seat style matches your original.