Mazda RX-8 Brake Replacement Parts
Compare prices on a used Mazda RX-8 brake from UK breakers. Free part request, no obligation.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
What to check when buying a used Mazda RX-8 brake
A used brake that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:
- State which brake part you need
- State whether it's front or rear
Other used Mazda RX-8 parts
- Used Mazda RX-8 Anti Roll Bar
- Used Mazda RX-8 Wheel Bearing
- Used Mazda RX-8 Wishbone
- Used Mazda RX-8 Brake Servo
- Used Mazda RX-8 Suspension Leg
- Used Mazda RX-8 Curtain Airbag
- Used Mazda RX-8 Slam Panel
- Used Mazda RX-8 Differential
- Used Mazda RX-8 Rear Bumper
- Used Mazda RX-8 Radio
- Used Mazda RX-8 ABS Pump
- Used Mazda RX-8 Side Skirt
Used brake for other Mazda models
Fitment questions
What years does the Mazda RX-8 cover, and are there any facelifts I need to know about for brake fitment?
The Mazda RX-8 ran from 2003 to 2012 as a single generation, with a facelift introduced in 2009 that brought styling and mechanical updates. For brake fitment the key boundary is that 2009 facelift, as some brake components changed at that point. Name the year of your car when requesting a quote, and ask the breaker to confirm the parts are from the correct pre- or post-2009 car.
Will brakes from a 2007 RX-8 fit my 2010 RX-8?
Your 2010 car is the post-2009 facelift, while the 2007 is pre-facelift, so they sit either side of a known model boundary. Brake specifications can differ across that 2009 facelift point, so while some components may cross over, you should confirm against your registration with the breaker before buying. Never assume fitment just because both cars carry the RX-8 name.
Does engine size affect which brakes fit the RX-8?
The RX-8 was sold in the UK with different power outputs from its rotary engine, including 192 PS and 231 PS versions, and braking hardware can differ between these. The higher-output variant may carry uprated brake components to match its performance, so the power output of the donor car matters. Tell the breaker the power variant of your car as well as the year so they can match accordingly.
Do trim levels like Icon, SE, or R3 affect brake fitment on the RX-8?
Trim level alone does not determine brake fitment on the RX-8 — what matters is the engine output and the pre- or post-facelift build date. The R3 in particular is associated with the higher-performance specification, so brakes from an R3 donor may differ from those on a standard trim car of the same year. Expect parts pulled from different trim cars to look identical in most cases, but confirm the power output matches your car with the breaker.
Do I need to specify a side when buying used RX-8 brakes?
For brake discs and pads the side generally does not matter as they are symmetrical, but brake calipers are handed, so you must specify nearside (NS, passenger side) or offside (OS, driver side) when ordering. Getting the side wrong means the caliper bleed nipple and fluid port will be incorrectly positioned. Always state NS or OS clearly when contacting a breaker for a caliper.
Are front and rear brakes from any RX-8 interchangeable with each other?
No — front and rear brake components are different sizes and are not interchangeable with each other on the RX-8. When requesting a quote, always state clearly whether you need front or rear parts as well as the year and engine output of your car. A good breaker will ask these questions, but confirming upfront avoids delays.