Used Mazda Premacy Heater Motor
Get quotes for a used or replacement Mazda Premacy heater motor. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Choosing the right used Mazda Premacy heater motor
Used heater motors vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
- State whether it's single or dual zone climate control
Other used Mazda Premacy parts
- Used Mazda Premacy Washer Pump
- Used Mazda Premacy Indicator Stalk
- Used Mazda Premacy Battery
- Used Mazda Premacy Wiper Blades
- Used Mazda Premacy Front Bumper
- Used Mazda Premacy Door Hinge
- Used Mazda Premacy Fuel Filter
- Used Mazda Premacy Glow Plugs
- Used Mazda Premacy Crankshaft
- Used Mazda Premacy Towbar
- Used Mazda Premacy Handbrake Lever
- Used Mazda Premacy Wiper Motor
Used heater motor for other Mazda models
Fitment questions
What is a heater motor on a Mazda Premacy and does the car have one?
Yes, the Mazda Premacy does have a heater motor (also called a blower motor or heater blower fan) — it is the electric motor that pushes air through the cabin heater and ventilation system, and every variant of the Premacy was fitted with one regardless of engine size or trim level. If your heater is blowing weakly or not at all, or making a rattling noise, this is the part you are likely looking for. It sits inside the heater box behind the dashboard, usually on the passenger (NS) side.
Will a heater motor from an early Mazda Premacy fit a later one — do the generations matter?
The Mazda Premacy ran across two main generations in the UK: the first generation (CP) covered roughly 2000 to 2005, and the second generation (CR) ran from around 2005 onwards. The heater box and blower motor design changed between these generations, so a first-generation unit is unlikely to be a direct fit in a second-generation car and vice versa. Confirm the generation of the donor car with the breaker against your registration before buying.
Does a heater motor from a 2001 Mazda Premacy fit a 2004 Mazda Premacy?
Both a 2001 and a 2004 Premacy fall within the first-generation (CP) range, so there is a reasonable chance the blower motor will interchange between those years. That said, confirm with the breaker using your full registration, as minor running changes within a generation can sometimes affect fitment on heater components. Never assume fitment without the breaker cross-referencing the part number.
Does trim level affect which heater motor I need on a Mazda Premacy?
No — trim level does not affect heater motor fitment on the Premacy; the blower unit is the same whether the car was a base or higher-spec model. The only cosmetic difference you might notice is that donor cars at different trim levels may have slightly different dashboard surrounds, but the motor itself is interchangeable within the same generation. Focus on matching the generation (CP or CR) rather than the trim.
Can I use a Mazda Premacy heater motor from a different engine variant — for example, does the 1.8 unit fit a 2.0?
Engine size does not affect the heater motor on the Mazda Premacy — the blower motor is part of the ventilation system, which is common across all engine variants within the same generation. A unit from a 1.8 petrol car will physically be the same as one from a 2.0 petrol car of the same generation, so do not let engine size put you off a good used unit. Confirm the year and generation match with the breaker against your registration.
Where can I find a used Mazda Premacy heater motor in the UK, and what should I tell the breaker?
You can get quotes from multiple UK vehicle dismantlers through Findapart — just submit your enquiry and breakers with a suitable Premacy in their yard will respond. To get the most accurate match, tell the breaker your full registration number, the year of your car, and whether it is a first-generation (CP, roughly 2000–2005) or second-generation (CR, from around 2005) model. Having the existing part number from your current motor is also helpful if you can get it.