Used Mazda MX-5 Shock Absorber
Get quotes for a used or replacement Mazda MX-5 shock absorber. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
A buyer's guide to used Mazda MX-5 shock absorber
No two shock absorbers are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
Also known as: shock.
- State whether it's front or rear
Other used Mazda MX-5 parts
- Used Mazda MX-5 Brake Servo
- Used Mazda MX-5 CV Joints
- Used Mazda MX-5 Subframe
- Used Mazda MX-5 Wheel Hub
- Used Mazda MX-5 Gear Stick
- Used Mazda MX-5 Radiator
- Used Mazda MX-5 Window Motor
- Used Mazda MX-5 Handbrake Lever
- Used Mazda MX-5 Coil Spring
- Used Mazda MX-5 Exhaust Manifold
- Used Mazda MX-5 Quarter Panel
- Used Mazda MX-5 Parcel Shelf
Used shock absorber for other Mazda models
Fitment questions
What generation is my Mazda MX-5 and does the generation affect which shock absorbers fit?
The MX-5 has been sold in four generations: NA (1989–1997), NB (1998–2005), NC (2005–2015), and ND (2015–present). Shock absorbers are generation-specific and will not interchange between these generations, so always confirm which generation you have before sourcing parts. Your registration plate is the quickest way to confirm this with a breaker.
Will shock absorbers from a 2004 MX-5 fit my 2006 MX-5?
This spans the NB-to-NC generation boundary — the NB ran until 2005 and the NC from 2005 onwards — and shock absorbers are not interchangeable across that change. Both the mounting geometry and suspension design differ significantly between those two generations. Confirm the exact generation of both vehicles with your breaker before ordering.
Does the trim level affect which shock absorbers fit — for example, will parts from an Icon fit an MX-5 Sport?
Trim level alone does not affect shock absorber fitment on the MX-5 — an Icon and a Sport of the same generation use the same basic suspension pickup points. However, some Sport or Sport Tech variants may have been fitted with uprated damper rates or Bilstein units from the factory, so the physical unit that comes off a Sport car may feel or perform differently even if it bolts on. Confirm with the breaker whether the unit they have came from a standard or sport-suspension car if that matters to you.
Does engine size matter when sourcing MX-5 shock absorbers?
For the MX-5 the engine size differences within each generation are relatively modest, and shock absorber fitment is primarily determined by generation rather than whether your car is a 1.6 or 1.8 or 2.0. That said, if you are unsure whether your exact variant carried any suspension differences, check with the breaker against your registration to be certain.
Do I need to specify NS or OS when buying a used MX-5 shock absorber?
Yes — shock absorbers are side-specific, so always tell the breaker whether you need the nearside (NS, passenger side) or offside (OS, driver side) unit. Ordering the wrong side is an easy mistake to make and most breakers will want to confirm this before pulling the part.
Will NC MX-5 shock absorbers fit throughout the whole 2005–2015 production run?
The NC generation ran from 2005 to 2015, and while the core suspension architecture remained consistent, there were detail changes across that period that may affect whether a specific shock absorber crosses those years. Whether a unit from an early NC fits a later NC is something you should confirm with the breaker against both registrations rather than assume direct compatibility throughout the full run.