Second Hand Mazda CX-3 Headrest

On the Mazda CX-3, the front headrests are separate, removable units that unclip from the seat back, so they can be sourced individually as used parts. Rear headrests are also removable on most trim levels. This means a used headrest from a breaker is a straightforward swap in most cases, provided you match the correct generation and trim.

The Mazda CX-3 first generation ran from 2015 to 2023, but received a facelift in 2018 which brought interior updates including revised seat trim on some variants, so a 2016 headrest and a 2019 headrest may differ in upholstery colour, stitch pattern, or material finish. The physical fitment post design may be compatible, but you should confirm this directly with the breaker quoting against your registration, as seat specifications can vary across the facelift boundary. Do not assume a cosmetic match without checking.

Yes, trim level matters for the Mazda CX-3 because seat upholstery and material vary between trims — SE and SE-L models typically have cloth seats, while Sport Nav, GT Sport, and GT Sport Tech trims can have leather or part-leather seats, meaning the headrest covering will differ. The headrest post and mounting design is generally consistent across trims of the same generation, so the physical fitment is usually the same, but you may end up with a headrest that does not match your seat material if you cross trim levels. Always tell the breaker your exact trim so they can supply a visually matching unit.

For front headrests, the NS (nearside, passenger) and OS (offside, driver) headrests on the CX-3 are generally the same shape and interchangeable, though you should confirm this with the breaker if your trim has any asymmetric seat features. Rear headrests may differ in size or shape from front ones, and on some trims the centre rear position differs from the outer positions, so specify exactly which position you need when contacting a breaker. Giving the breaker your registration and the seating position will help them pull the correct part.

A standard Mazda CX-3 headrest with no integrated electronics is a simple press-and-click fit requiring no tools, so most owners can replace it at home without needing a garage. However, if your headrest incorporates an active head restraint mechanism or any wiring, you should confirm with a garage before fitting. There are no airbag or pretensioner concerns with a plain headrest, but always check what you are receiving from the breaker matches your original specification.

Both the 2015 and 2020–2021 CX-3 fall within the same first-generation model run (2015–2023), but the 2018 facelift introduced interior revisions that may have altered seat and headrest specifications on some trim levels. The mounting post design may be physically compatible, but material, colour, and finish are likely to differ across that facelift boundary, and fitment cannot be guaranteed. Confirm with the breaker by providing your registration and trim level so they can advise whether the part from their vehicle is a practical match for yours.