Mazda 323 Headrest Replacement Parts

Headrests on the Mazda 323 fit by generation, so you need to match the correct one — the main generations sold in the UK were the BF (1985–1989), BG (1989–1994), BA (1994–1998), and BJ (1998–2003). A headrest from within the same generation should be a reasonable match, but crossing a generation boundary — for example using a BG part on a BA — is unlikely to work due to differences in seat design and mounting. Always confirm the specific generation and trim with the breaker against your registration before buying.

Door count can affect the seat specification on some 323 variants, particularly where rear seats differ between three-door and five-door body styles, so it is worth telling the breaker whether your car is a three-door or five-door. For front headrests this is less likely to matter, but for rear headrests the difference can be more significant. Confirm the door count with your breaker when requesting a quote.

Trim level can matter for headrests on the Mazda 323 because seat style and upholstery varied between trim grades — for example, higher-specification trims sometimes had different seat designs to entry-level variants within the same generation. A headrest from a lower trim may physically fit the seat frame but look noticeably different in terms of material or shape. Tell your breaker your trim level as well as your generation so they can try to find a closer match.

The BG ran from 1989 to 1994 and the BA from 1994 to 1998, and these are distinct generations with different seat designs, so a direct swap across that boundary is not reliable. The mounting stalk diameter and spacing can differ between generations, meaning a BG headrest may not locate correctly in a BA seat. Confirm compatibility directly with your breaker against your registration before ordering.

For front headrests the side typically does not matter, as driver and passenger seats on the 323 generally used the same headrest within a given trim level — though if your seats are electric or have any asymmetric adjustment features on higher trims, there could be differences. For rear headrests, side does become relevant as outer and centre rear headrests are different parts. Tell your breaker which position you need — nearside (NS) front, offside (OS) front, or the relevant rear position — to make sure you get the right piece.

No — engine size has no bearing on headrest fitment, as the seats and headrests are determined by generation, trim level, and body style rather than what is under the bonnet. Whether your 323 has a 1.3, 1.5, 1.6, or 1.8 engine makes no difference to which headrest you need. Focus on generation and trim when speaking to your breaker.