Mazda CX-3 Brake Caliper Replacement Parts
Need a used Mazda CX-3 brake caliper? Request a free quote from UK vehicle dismantlers and compare offers direct.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
What to check when buying a used Mazda CX-3 brake caliper
A used brake caliper that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:
- State whether it's front or rear, left or right
Other used Mazda CX-3 parts
- Used Mazda CX-3 Shock Absorber
- Used Mazda CX-3 Brake Servo
- Used Mazda CX-3 Axle
- Used Mazda CX-3 ABS Pump
- Used Mazda CX-3 Water Pump
- Used Mazda CX-3 Airbag Control Module
- Used Mazda CX-3 Dual Mass Flywheel
- Used Mazda CX-3 Transfer Box
- Used Mazda CX-3 Suspension Leg
- Used Mazda CX-3 Window Regulator
- Used Mazda CX-3 Timing Chain
- Used Mazda CX-3 Curtain Airbag
Used brake caliper for other Mazda models
Fitment questions
Do brake calipers from a 2015 CX-3 fit a 2018 CX-3?
The Mazda CX-3 was launched in 2015 and received a facelift in 2018, so a 2015 and a 2018 car sit either side of that boundary. The brake caliper design may well be shared across the full first-generation range, but whether the part crosses that 2018 facelift boundary is something you should confirm with the breaker against your registration, as Mazda sometimes revised running gear at facelift points. Never assume fitment without checking.
Does engine size affect which brake caliper I need on a CX-3?
Yes, engine size can influence brake specification on the CX-3, which was sold in the UK with 1.5 and 2.0 petrol engines as well as a 1.5 diesel — larger or more powerful variants sometimes carry bigger calipers to match their stopping requirements. When asking a breaker for a quote, always give your exact engine size and registration so they can match the correct caliper. Do not assume all CX-3 calipers are interchangeable across engine variants.
Does the trim level affect which brake caliper I need — for example, does an SE-L caliper fit a Sport Nav?
Trim level alone does not affect brake caliper fitment on the CX-3 — SE, SE-L, Sport Nav, and GT Sport trims do not receive different calipers purely because of their badge. What matters is the engine size and which generation the car is, not the trim name. That said, always confirm the part number with the breaker against your registration to be sure nothing else differs on your specific car.
Do I need to specify NS or OS when buying a used CX-3 brake caliper?
Yes, absolutely — brake calipers are handed, meaning the nearside (NS, left) and offside (OS, right) are different parts and will not swap over. Always tell the breaker which side you need before they pull the part. Fitting the wrong side is a safety risk and a wasted journey.
Are brake calipers actually fitted to all Mazda CX-3 models?
Yes, all Mazda CX-3 models sold in the UK have brake calipers on all four wheels — this is a standard braking component on every variant of the car regardless of engine, trim, or drivetrain. There is no CX-3 variant that was sold without calipers, so you do not need to worry about whether this part exists on your car. Simply confirm your engine size, model year, and the side you need when contacting a breaker.
Will a 2.0 petrol CX-3 caliper fit my 1.5 diesel CX-3?
This is not a swap you should make without checking carefully, as the 2.0 petrol CX-3 may be fitted with larger or differently specified calipers compared with the 1.5 diesel to suit the different power outputs. Brake caliper fitment on the CX-3 follows engine size more than model year or trim, so mixing across engine variants carries a real risk of a mismatch. Confirm compatibility with the breaker against both registrations before purchasing.