Used Mazda 6 Subframe
Get quotes for a used or replacement Mazda 6 subframe. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
What to check when buying a used Mazda 6 subframe
A used subframe that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:
Also known as: sub frame.
- State whether it's front or rear
- State if it's 2WD or 4WD
Other used Mazda 6 parts
Used subframe for other Mazda models
Fitment questions
What years does the Mazda 6 subframe fit across – what are the generations?
The Mazda 6 runs across three main generations: the first generation (GG/GY) ran from 2002 to 2008, the second generation (GH) ran from 2008 to 2012, and the third generation (GJ) ran from 2012 onwards with a facelift around 2015. Subframes are generation-specific, so always match the part to the correct generation against your registration plate. Confirm exact fitment with the breaker before purchasing.
Will a subframe from a 2007 Mazda 6 fit a 2009 Mazda 6?
These two cars sit in different generations – the 2007 model is first generation (GG, 2002–2008) and the 2009 model is second generation (GH, 2008–2012), so the subframe crosses a known generation boundary. Parts across this boundary are not a straightforward swap, and fitment cannot be assumed. Confirm with the breaker whether the subframe from one generation is compatible with the other before ordering.
Does engine size affect which subframe I need on a Mazda 6?
Engine size can influence subframe and front suspension geometry because heavier or more powerful engines sometimes require a strengthened or dimensionally different subframe to suit the drivetrain layout. It is worth telling the breaker both your engine size and your registration so they can check the correct part is supplied. Never assume a subframe from a different engine variant will be a direct fit without confirming this first.
Does it matter whether my Mazda 6 is an SE, Sport, or TS – will any subframe fit?
Trim level – whether your car is an SE, TS, or Sport – does not affect subframe fitment, as the subframe is part of the running gear rather than the interior or cosmetic specification. What matters is the generation and engine size, not the trim badge. You may find other incidental differences when a subframe arrives from a different-spec donor car, but the subframe itself should not vary by trim.
Will a subframe from a pre-facelift Mazda 6 GJ fit a post-facelift model?
The Mazda 6 GJ received a facelift around 2015, and while the fundamental platform is shared across the generation, whether the subframe crosses that facelift boundary without issue is not something that can be stated with certainty. Confirm this directly with the breaker, quoting both the donor car's year and your registration, so they can check the part numbers match before you commit.
Does it matter which side a Mazda 6 subframe came from?
A subframe is a central structural component that spans both sides of the front or rear axle, so there is no NS or OS distinction – unlike a wishbone or a driveshaft. What does matter is matching the correct generation and engine variant to your car. Always quote your full registration to the breaker so they can verify the right subframe is supplied.