Compare prices on a used Mazda 2 steering rack from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
A used steering rack that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:
The Mazda 2 has run across three main generations in the UK: the first generation (Demio-based) from 2003 to 2007, the second generation from 2007 to 2015 (with a facelift around 2010), and the third generation from 2015 onwards. Steering racks are generally generation-specific, so always make sure you and the breaker are working from the same generation when getting a quote. Confirm fitment against your exact registration to be safe.
Both the 2009 and 2012 Mazda 2 sit within the second generation (2007–2015), so they share the same basic platform and a rack from this era is a reasonable starting point. However, the second generation received a facelift around 2010, and it is worth confirming with the breaker whether any running-gear changes accompanied that update before assuming a straight swap. Always verify the part against your registration number before buying.
No — the 2007 model year marks a full generation change for the Mazda 2, with an entirely new platform replacing the first-generation car, so the steering rack from a pre-2007 car will not cross over to a post-2007 model. If you are sourcing a rack across this boundary, treat it as a different car entirely and tell the breaker which generation yours is. Confirm against your registration to be certain which generation you have.
Trim level does not affect which steering rack a Mazda 2 uses — the rack is determined by the generation and, where applicable, the engine size, not whether the car is badged SE, Sport, or Venture Edition. You may receive a rack with different paint or minor surface finishes depending on what the breaker has pulled, but this has no bearing on fitment or function. Focus your search on matching the generation and engine size rather than the trim name.
It can do — different engine variants can place different demands on steering components, so a rack from a 1.5-litre car may not be identical to one from a 1.3-litre car even within the same generation. Always tell the breaker your exact engine size alongside the model year so they can match the correct unit. Confirm the part against your full registration before agreeing to purchase.
Yes, this is an important distinction — left-hand-drive Mazda 2s sold in Europe have their steering racks configured for the opposite side, and these will not correctly fit a UK right-hand-drive car. Always make sure any rack you source is from a right-hand-drive vehicle, which a reputable UK breaker should be able to confirm. If you are in any doubt, ask the breaker explicitly before buying.