Cheap Hyundai Kona Glove Box

The Hyundai Kona first generation ran from 2017 to 2023, so a 2018 and a 2020 are both within the same generation and the glove box should be compatible in terms of basic fitment. However, the Kona received a facelift in 2021, which brought some interior trim changes, so a pre-facelift glove box from 2018 may differ slightly in finish or detailing from a post-facelift 2020 example. Confirm the exact part number with the breaker against your registration to be sure you get a matching piece.

Yes, the Hyundai Kona is a standard passenger SUV and all variants — regardless of engine, drivetrain, or trim level — are fitted with a glove box on the passenger side of the dashboard. There are no Kona derivatives where the glove box was deleted or replaced with an alternative storage arrangement. You can search for a used one with confidence that it exists on your vehicle.

No, the first-generation Kona (2017–2023) and the second-generation Kona (2023 onwards) have completely different dashboard structures, so a glove box from the earlier generation will not fit the later car. Always make sure the breaker is supplying a part from the same generation as your vehicle. Confirm the year and generation with the breaker against your registration before ordering.

For the most part, the glove box casing and mounting are shared across Kona trim levels including SE, SE Connect, Premium, and N Line, so the basic unit should interchange within the same generation. You may notice minor cosmetic differences in finish — for example, contrast stitching or slightly different interior colour tones on higher or sportier trims — so if a perfect visual match matters to you, ask the breaker to source a part from a car of the same trim level. The fundamental fitment itself is not affected by trim.

No, the engine or drivetrain type — including petrol, diesel, mild hybrid, or the all-electric Kona Electric — does not affect glove box fitment, as it is a purely interior trim component unrelated to the powertrain. What matters is that the part comes from the same generation of Kona as your car. Focus on matching the generation and, if cosmetic finish is important to you, the trim level.

A glove box is a straightforward interior trim part with no safety-critical systems involved, so most reasonably confident DIYers can swap one at home using basic tools. It typically involves removing a few fixings and disconnecting a damper strap or light connector if fitted. That said, if you are unsure about working around the passenger airbag area during removal, having a garage assist is a sensible precaution.