Findapart

Cheap Ford Transit Connect Window Switch

Get quotes for a used or replacement Ford Transit Connect window switch. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

Choosing the right used Ford Transit Connect window switch

Used window switchs vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:

Other used Ford Transit Connect parts

Used window switch for other Ford models

Fitment questions

Do Ford Transit Connect window switches actually exist, or is it a manual-wind van?

Window switches do exist on the Ford Transit Connect – electric windows have been available across the range, though they were not standard on every trim level, so some lower-spec vans left the factory with manual winders and no switch at all. If your van has electric windows you will have a switch (or a switch panel), but if yours was built with manual windows there is no switch to source. Check your door cards for a switch aperture or blank to confirm which you have before ordering.

Will a window switch from a Mk1 Transit Connect (2002–2013) fit my Mk2 (2013–2018)?

The Mk1 Transit Connect ran from 2002 to 2013 and the Mk2 from 2013 onwards, and these are fundamentally different generations with different door furniture and wiring, so a Mk1 switch will not transfer to a Mk2. Keep your search within the correct generation and confirm the exact part against your registration with the breaker before buying.

Does the year of facelift matter – will a pre-2018 Mk2 switch fit a post-2018 Transit Connect?

The Mk2 Transit Connect received a notable update around 2018 and it is genuinely uncertain whether the switch design or connector changed at that point, so this is a boundary you should not assume is safe to cross. Name the generation (Mk2) and the build year of your van when asking the breaker, and have them check the part number against your registration to be sure.

Does the window switch differ between NS (passenger) and OS (driver) sides on the Transit Connect?

Yes – on most configurations the driver's (OS) door carries the master switch panel that controls all windows, while the passenger (NS) door carries a simpler single-window switch, so the two sides are not interchangeable. Always tell the breaker which side you need, and if your van has rear passenger doors with electric windows, specify which door position too.

Does the switch differ between the short-wheelbase and long-wheelbase Transit Connect?

For the front door switches, wheelbase should not affect fitment as the front doors are shared across wheelbases within the same generation. Wheelbase becomes relevant for sliding rear door switches if your van has a powered sliding door, so mention your wheelbase and door configuration to the breaker if you are sourcing anything other than a standard front window switch.

Does trim level matter – will a switch from an Edge or Sport fit a base-grade Transit Connect?

Trim level can matter here because lower grades may have had manual windows with no switch fitted at all, whereas higher trims like Trend, Limited, or Sport were more likely to include electric windows as standard. If both vans have electric windows the physical switch may well be the same part, but confirm with the breaker against both registrations as wiring and connector differences between trim specifications are possible.