Ford Transit Connect Oil Cooler Replacement Parts

Yes, oil coolers are fitted to the diesel-engined Transit Connects, particularly the common 1.5 TDCi and 1.6 TDCi units, where managing oil temperature is important for turbo longevity and engine protection. Petrol-engined variants are far less likely to carry a dedicated oil cooler, so if your Connect is petrol, the part you need may not exist on your vehicle at all. If you are unsure which engine you have, check your V5 registration document or run a VIN check to confirm the engine code before ordering.

The Transit Connect ran as the Mk1 from 2002 to 2013 and the Mk2 from 2013 onwards, and these are entirely different platforms with different engine families, so an oil cooler from a Mk1 will not cross over to a Mk2. Even within each generation the engine code is the deciding factor, so a part from a 1.8 TDCi Mk1 will not suit a 1.6 TDCi Mk2 regardless of anything else. Always confirm the exact engine code with the breaker before purchasing.

Both years sit within the Mk2 generation (2013 onwards), so you are in the right ballpark, but the 1.5 TDCi replaced the 1.6 TDCi during the Mk2 run and these units use different oil coolers. If both vehicles share the same engine code, fitment is very likely, but there were also ancillary and mounting detail changes across the production run that are hard to confirm without checking registration to registration. Ask the breaker to verify against your specific reg before committing.

For the oil cooler, trim level makes no difference whatsoever – Edge, Limited, Sport and any other Connect trim all share the same engine-driven components when the engine code matches. Trim affects things like interior specification and exterior styling, not the oiling system. Match on engine code and year, and the trim badge is irrelevant.

The 1.5 TDCi is the engine family name, but the actual engine code is a more precise identifier – typically a letter-and-number combination found on the V5 logbook or via a VIN check – and that is what the breaker needs to pinpoint the correct oil cooler. Two Transit Connects both described as 1.5 TDCi can carry different engine codes with different component specifications, so the family name alone is not enough. Always supply the full engine code when requesting a quote.

Yes – body style has no bearing on oil cooler fitment, as the engine bay components are shared across van and Kombi bodystyles within the same engine family. The oil cooler is determined entirely by the engine code, fuel type, and gearbox configuration, not by what body is bolted around it. As always, confirm the engine code matches before the breaker dispatches the part.