Ford Fusion Flywheel Replacement Parts

It depends on the gearbox type fitted to your specific Fusion. Fusions equipped with a manual gearbox have a conventional flywheel (or dual-mass flywheel depending on engine and year), whereas those fitted with an automatic gearbox use a torque converter and flexplate instead — not a traditional flywheel. Check your V5 or a VIN check to confirm whether your Fusion is manual or automatic before searching for this part.

The Ford Fusion was produced from 2002 to 2012 as a single generation, but the most important factor for flywheel fitment is the engine code, not just the year. Even within the same generation, different engine codes — such as the 1.4, 1.6 petrol or 1.4 TDCi and 1.6 TDCi diesels — can require different flywheels, so a 2004-to-2007 swap is not straightforward without matching engine codes first. Always confirm the engine code from your V5 and supply it to the breaker before purchasing.

Yes, fuel type matters significantly — diesel Fusions, particularly those with the 1.6 TDCi engine, commonly use a dual-mass flywheel, while petrol variants typically use a lighter single-mass unit, and the two are not interchangeable. The engine code is the single most reliable detail you can supply to a breaker, as it immediately tells them which flywheel design applies to your vehicle. Find your engine code on your V5 document or through a VIN check before making contact.

No, trim level has no bearing on flywheel fitment whatsoever — LX, Zetec, and Ghia Fusions running the same engine code and gearbox type will use the same flywheel. The flywheel is determined entirely by the engine and gearbox combination, not by any badge or trim-level specification. Focus your search on matching the engine code and confirming it is a manual-gearbox car.

It is possible that ancillary or mounting details changed at some point during the Fusion's production run without a full model revision, which could affect whether a flywheel from one year bolts directly into another. This is the kind of detail that is difficult to confirm without checking the specific registration and engine code against the breaker's stock, so we would recommend doing exactly that before committing to a purchase. Give the breaker your full engine code and registration and ask them to verify compatibility with the unit they have.

Because the Ford Fusion shares its platform and many engines with the contemporary Fiesta and Focus, there is a reasonable chance that a flywheel from a matching engine code in one of those models could be compatible — however, this is not guaranteed, as subtle differences can exist between applications. The engine code is the starting point, but you should confirm cross-model fitment directly with the breaker, supplying your registration and engine code so they can check their parts against your vehicle's specification. Never assume compatibility based on engine family alone.