Cheap Fiat Panda Drive Shaft

Both years fall within the second-generation Panda (2003–2012), so there is a reasonable chance of compatibility, but the engine code is the key detail — a shaft from a 1.2 petrol engine will not suit a 1.3 Multijet diesel even within the same generation. Supply your engine code (shown on your V5 or via a VIN check) when contacting a breaker, along with whether your gearbox is manual or automatic. This gives the breaker what they need to confirm the part before it leaves the yard.

The second-generation Panda ran from 2003 to 2012, and the third generation began in 2012, so these are distinct platforms and a shaft from one will not simply cross over to the other. Engine codes and suspension geometry changed with the new generation, making a like-for-like swap very unlikely. Always quote your registration or engine code to the breaker so they can pull a shaft confirmed against your specific vehicle.

No, trim level does not affect drive shaft fitment on the Panda — Active, Lounge, Eleganza and other trim grades share the same driveline components when the engine code and gearbox type match. The differences between trims are cosmetic, such as upholstery, alloy wheels, and interior finishes, none of which change the shaft. Match on engine code, fuel type, and gearbox, and trim is irrelevant.

Yes, NS (nearside, left) and OS (offside, right) shafts are different parts and are not interchangeable, so always specify which side you need when contacting a breaker. On many front-wheel-drive applications the two shafts are also different lengths, which makes fitting the wrong side impossible or dangerous. State your side clearly alongside your engine code and year to get the right quote first time.

The third-generation Panda launched in late 2012, so a 2012 car could be either generation depending on when it was built and registered. The safest approach is to run a VIN check or consult your V5 to identify the engine code, which will make the generation clear and is the detail breakers need to pull the correct shaft. Do not assume based on year alone — quote the engine code directly.

No — fuel type determines the engine fitted, and different engines pair with different drive shafts, so a shaft from a 1.2 petrol Panda will not be correct for a 1.3 Multijet diesel Panda even if the cars are from the same year and generation. The engine code (for example, 169A4 for the 1.2 petrol) is the reliable way to ensure the breaker matches the right shaft to your car. Always provide your engine code rather than relying on year or fuel type description alone.