Fiat Fullback Bumper Replacement Parts

The Fiat Fullback was produced from 2016 to 2020, sharing its platform with the Mitsubishi L200 fourth generation. A facelift arrived for the 2019 model year, bringing revised front-end styling including a new grille, headlights, and bumper design. When searching for a used bumper, establishing whether your truck is a pre-facelift (2016–2018) or facelift (2019–2020) example is the most important step before buying.

The 2019 Fullback marks the facelift boundary, where the front-end styling — including the bumper — was updated, so a 2017 pre-facelift bumper and a 2019 facelift bumper are likely different parts. You should confirm with the breaker directly, quoting both registration numbers, whether the specific panel you're looking at crosses that 2018-to-2019 facelift boundary. Never assume a bumper from either side of that cut-off will drop straight in without that check.

For the Fullback, trim level does not affect the fundamental fitment of the bumper — the same shell fits across standard and Cross variants within the same facelift period. However, you should be aware that the Cross trim featured distinctive styling elements such as additional cladding or colour accents, so a bumper sourced from a standard-trim example may look cosmetically different even if it bolts on correctly. Always confirm the pre-facelift or facelift status with the breaker against your registration, as that is the true fitment boundary here.

The Fullback is built on the same platform as the fourth-generation Mitsubishi L200 and shares significant structural underpinnings, but Fiat gave the Fullback its own distinct front-end styling with a different grille, headlight surrounds, and bumper design. This means a standard L200 bumper is not a direct cosmetic match, even if some mounting points are shared. Confirm with the breaker whether any specific panel is a genuine Fullback part before purchasing.

No — front bumpers are shared across body configurations within the same generation and facelift period, so differences in load bed length or cab style do not determine which bumper fits. The only split that matters for fitment is whether your truck is a pre-facelift (2016–2018) or facelift (2019–2020) example. Confirm this with the breaker against your registration to make sure the part is from the correct period.

Give the breaker your full registration number so they can confirm whether your truck is a pre-facelift (2016–2018) or facelift (2019–2020) model, as that is the critical fitment boundary for front bumpers. Let them know which bumper you need — front or rear, NS or OS if it's a corner piece — and whether your truck has any parking sensors or tow-hook apertures that need to be present in the replacement. The breaker can then match the part accurately and advise on any cosmetic differences to expect from the donor vehicle's trim level.