BMW X1 Rear View Mirror Replacement Parts

This depends on which generation your vehicles are: the second-generation X1 (F48) ran from 2015 to 2022, so both a 2016 and a 2019 car fall within the same generation, which is a good starting point for compatibility. However, BMW introduced a facelift to the F48 in 2019, and interior trim details including mirror electronics and auto-dimming features can vary across that boundary. Confirm with the breaker whether the specific mirror from the pre-facelift car matches your post-facelift registration before purchasing.

No — the first-generation X1 (E84, 2009–2015) and the second-generation X1 (F48, 2015–2022) are entirely different platforms with different windscreen profiles and mounting arrangements, so the mirrors are not interchangeable. Always source a mirror from the same generation as your car, and let the breaker confirm fitment against your exact registration.

No — the interior rear view mirror on the BMW X1 is the same regardless of whether the car has a petrol, diesel, or xDrive four-wheel-drive setup. Engine and drivetrain do not influence mirror fitment, so you can disregard those details when searching. Focus instead on generation (E84 or F48) and any optional features your car has such as auto-dimming or a built-in camera.

Trim level can affect the rear view mirror on the BMW X1, because higher trims such as M Sport or xLine were more commonly specified with options like auto-dimming or an integrated rain sensor, whereas entry-level SE models may have a simpler manual mirror. The physical mounting is the same within a generation, but if your car has auto-dimming or a camera you will need a donor mirror with the same feature. Ask the breaker to confirm the specification of the mirror against your registration to avoid ending up with a mirror that is missing functionality your car expects.

A 2012 BMW X1 is a first-generation E84, which ran from 2009 to 2015, so confirm that generation with the breaker straight away. Beyond that, let them know whether your mirror has any built-in features such as auto-dimming, a rain sensor, or a camera, as these affect which donor car is suitable. Providing your full registration will allow a good breaker to cross-reference the exact specification and avoid sending you an incompatible unit.

A standard rear view mirror replacement on a BMW X1 is generally a straightforward job — the mirror typically unclips or unbolts from its mounting button on the windscreen, and a basic mirror can be swapped at home. If your mirror incorporates auto-dimming, a rain sensor, or a camera, there may be a wiring connector to disconnect and reconnect, which adds a small amount of complexity but is still manageable for a confident DIYer. If in doubt, a local garage or auto-electrician can carry out the swap quickly and inexpensively.