Findapart

Cheap BMW i7 Brake Light Switch

Get quotes for a used or replacement BMW i7 brake light switch. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

Other used BMW i7 parts

Used brake light switch for other BMW models

Fitment questions

Does the BMW i7 have a brake light switch?

Yes, the BMW i7 does have a brake light switch — even though it is a fully electric vehicle with no combustion engine, it still uses a conventional brake pedal and a brake light switch to signal braking to the rear lights and the vehicle's safety systems. The switch is a standard mechanical/electronic unit mounted on the brake pedal assembly, much like any other modern BMW. Buyers should note that regenerative braking is handled separately by the drivetrain control systems, not by this switch.

Will a brake light switch from a 2022 i7 fit a 2023 or 2024 i7?

The BMW i7 (G70) launched in 2022 and as of writing remains in its first generation with no major facelift that would be expected to affect the brake pedal assembly or switch. A switch from a 2022 i7 is therefore likely to be the same part as one from a 2023 or 2024 car, but you should confirm the exact part number against your registration with the breaker before buying, as mid-production running changes can occur without a formal facelift.

Does the trim level affect which brake light switch I need — does it matter if my i7 is an eDrive50, xDrive60, or M70?

Trim and powertrain variants like eDrive50, xDrive60, and M70 xDrive do not affect the brake light switch fitment, as the brake pedal assembly and switch design are determined by the platform rather than the drive configuration or performance level. The M70 carries significantly more power but the brake light switch itself is not the component that changes to accommodate this. Confirm the part number with the breaker against your registration to be certain, but trim level alone should not be a barrier to fitment.

Can I use a brake light switch from a G70 BMW 7 Series petrol or diesel on my i7?

The BMW i7 shares its G70 platform with the combustion-engined 7 Series (730i, 740i, 760i, 740d and so on), and the brake pedal assembly is common across this generation, meaning the brake light switch is very likely the same part. This makes G70 petrol and diesel 7 Series donors a potentially good source of this switch, widening the pool of available used parts at your breaker. Always confirm the part number against both registrations with the breaker before purchasing, as there is no guarantee of interchangeability.

Is the i7 brake light switch the same as the one on an older G11/G12 7 Series?

The G11/G12 generation 7 Series ran from 2015 to 2022 and is a different platform from the G70 i7, so the brake light switch is unlikely to be a direct swap even though the two generations overlap in years. Do not assume compatibility across this generation boundary — ask your breaker to cross-reference the part number from a G70 against your i7's registration before agreeing a purchase.

Where is the brake light switch located on the BMW i7 and is it straightforward to replace from a breaker part?

On the BMW i7 the brake light switch is located at the top of the brake pedal assembly under the dashboard on the driver's side (right-hand side in UK right-hand-drive cars, i.e. the OS), which is a common position across modern BMWs. Sourcing a used unit from a breaker is a practical option as it is a relatively simple mechanical and electrical component not prone to wear from mileage alone. Fitting should be straightforward for a competent independent BMW specialist, though it is worth asking your breaker whether the unit has been tested prior to sale.