Used Audi A5 Front Bumper

The first-generation A5 (8T platform) ran from 2007 to 2016, with a facelift in 2011 that brought a revised front bumper, grille and headlight design. Pre-facelift bumpers (2007–2011) fit each other, and post-facelift bumpers (2011–2016) fit each other, but whether a pre-facelift unit crosses over to a post-facelift car (or vice versa) is something you should confirm with the breaker against your registration. The second-generation A5 (F5 platform) launched in 2016 and uses an entirely different front end.

These two cars sit on opposite sides of the 2011 first-generation facelift boundary, so the bumper designs differ and a straight swap is not straightforward. Name both registrations to the breaker and ask them to check whether the specific panel you are buying is compatible across that facelift line — they can verify this against your VIN. Do not assume fitment just because both cars are first-generation A5s.

No — within the same generation and facelift period the front bumper is shared across Coupe, Cabriolet and Sportback body styles, because the front-end structure is identical regardless of door count or roof type. You do not need to hunt specifically for a 'Sportback bumper' or 'Cabriolet bumper'; any matching-year, matching-facelift first- or second-generation unit will suit your car. Always confirm the exact registration with the breaker to make sure the facelift period lines up.

Trim level does not change the fundamental fitment of an Audi A5 front bumper; generation and facelift period are what matter. However, you should be aware that S Line and Black Edition models came with a more aggressive lower apron and different bumper styling compared with SE, so a like-for-like swap from the same trim will give the tidiest cosmetic result. If you fit an SE bumper to an S Line car (or the other way around) it will mount correctly but the appearance will differ, so mention your trim to the breaker so they can source the right look as well as the right fit.

Both years fall within the second-generation A5 (F5 platform, launched 2016), so provided there is no facelift boundary between them the bumper should be from the same design era. The second-generation A5 received a mid-life update around 2019–2020 that made minor front-end revisions, so confirm with the breaker whether the specific 2020 panel you are looking at matches your 2018 car's specification. Give the breaker both registrations and ask them to cross-reference before purchasing.

Engine choice has no bearing on front bumper fitment for the Audi A5; the front-end panels are the same regardless of whether you have a petrol, diesel, or the S5's engine under the bonnet. What matters is generation (first-gen 8T 2007–2016, or second-gen F5 2016-onwards) and facelift period. Share your registration with the breaker and they will match the correct bumper to your car without needing to know the engine.