Used Audi A4 Quarter Panel

The A4 has run across several distinct generations: B5 (1994–2001), B6 (2001–2005), B7 (2005–2008), B8 (2008–2016, facelifted 2012), and B9 (2016–present) — quarter panels do not cross between these generations as the bodyshells are completely different. Within a single generation, body style is the most important factor: saloon, estate (Avant), and cabriolet (B6/B7 only) all use different quarter panels and will not interchange with each other. Always confirm your exact generation and body style with the breaker when requesting a quote.

Both 2010 and 2014 fall within the B8 generation (2008–2016), but the B8 received a facelift in 2012 which may have included pressing changes to rear body panels. The generation boundary is well established, but whether the pre-facelift and post-facelift quarter panels are interchangeable is something you should confirm with the breaker against your exact registration before buying. Make sure you also match body style — a B8 saloon panel will not fit a B8 Avant.

Trim level — whether your car is SE, Sport, S Line, or Black Edition — does not affect quarter panel fitment; the pressed steel panel itself is the same across all trims on the same generation and body style. What can differ cosmetically are any mouldings, side skirt extensions, or body-coloured trim pieces associated with S Line or Black Edition spec, so bear in mind a panel pulled from a lower-spec car may arrive without those additions. Confirm the generation and body style with the breaker, and factor in any trim-specific exterior additions separately.

No — the Avant (estate) and saloon have entirely different rear body structures and quarter panels, and the parts will not interchange at all. This is one of the most important things to get right when sourcing a used quarter panel, so always tell the breaker clearly whether your car is a saloon or Avant. Cabriolet buyers should also note their quarter panel is unique to that body style and is not shared with either the saloon or Avant.

Quarter panels are side-specific — the nearside (NS, passenger side) and offside (OS, driver side) are mirror images of each other and cannot be swapped. Always tell the breaker clearly which side you need, and double-check when the part arrives before booking in any bodywork. Getting the side wrong is an easy and costly mistake to make when ordering remotely.

The B6 (2001–2005) and B7 (2005–2008) share the same basic platform and the cars look very similar, but whether their quarter panels actually interchange is not something that can be stated as a given — confirm this directly with the breaker against both registrations before purchasing. Body style must still match exactly regardless, so a B6 saloon panel would only potentially correspond to a B7 saloon, not an Avant or cabriolet. A good breaker will be able to check panel part numbers against both vehicles to give you a definitive answer.