Compare prices on a used Alfa Romeo Giulietta wheel trims from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Fitment on a used wheel trims varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:
Wheel trims are plastic covers that clip over steel wheels, used as a cheaper alternative to alloy wheels on more basic trim levels. The Alfa Romeo Giulietta was indeed sold in entry-level trims such as Progression and Lusso that came fitted with steel wheels and plastic wheel trims, so yes, this part does exist on the model for those variants. Higher trims like Veloce and Quadrifoglio Verde came with alloy wheels as standard and would never have had wheel trims fitted from the factory. If your car has alloys, you are more likely looking for an alloy wheel rather than a trim.
The Giulietta ran as a single generation from 2010 through to 2021, with a facelift arriving around 2014, so a 2012 and a 2017 car are both from the same generation but either side of that facelift. Wheel trim fitment is primarily determined by wheel diameter and the steel wheel's clip pattern rather than the facelift year itself, so trims of the same size should physically fit, but confirm the exact wheel size and clip-on specification with the breaker against your registration before buying. Never assume fitment without that check.
Trim level itself does not affect wheel trim fitment — what matters is the size of the steel wheel underneath, which was consistent across the steel-wheel-equipped variants of the Giulietta. A Progression and a Lusso both fitted with 15-inch or 16-inch steel wheels of the same diameter will take the same trim, though the original trims may differ in style or design between model years. If you are replacing like-for-like you may notice a cosmetic difference between an earlier and later trim design, but the breaker can advise on what diameter and clip type you need to match your steel wheels.
If your Giulietta left the factory with alloy wheels, it will not have steel wheels underneath them, so conventional clip-on wheel trims are not designed to fit alloy wheels and would not be appropriate. What you are most likely looking for is either a replacement alloy wheel or a centre cap if only the centre section is missing or damaged. Confirm what you actually need with a breaker by providing your registration, as alloy wheel sizes varied across the Giulietta range.
The correct size depends on the diameter of the steel wheels fitted to your specific car, as this varied across trim levels and model years on the Giulietta. Rather than guessing, check the tyre sidewall on your car — the final number in the tyre size code (e.g. R15 or R16) tells you the wheel diameter in inches and therefore the trim size you need. Always confirm the exact fitment with the breaker against your registration to make sure the clip pattern as well as the diameter is a match.
Used wheel trims from breakers are generally available but may come as individual pieces rather than a full set of four, as trims are often lost or damaged one at a time. When contacting a breaker on Findapart, specify whether you need a single trim or a full set, and check whether any trims offered match in design, as Alfa Romeo updated the trim style at points during the Giulietta's production run from 2010 to 2021. Confirm the wheel diameter and model year of the donor car with the breaker before agreeing to buy.