Compare prices on a used Volkswagen Scirocco handbrake cable from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Fitment on a used handbrake cable varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:
The Mk3 Volkswagen Scirocco (2008–2017) uses an electronic parking brake rather than a traditional cable-operated handbrake, so there is no conventional handbrake cable fitted to any variant of this car. If you are searching for a handbrake cable, you may be thinking of the earlier Mk1 or Mk2 Scirocco (produced in the 1970s and 1980s), which did use a traditional cable mechanism. Alternatively, if you have a fault with the parking brake system on a Mk3 Scirocco, the part you actually need is likely an electronic parking brake actuator or related wiring, which your breaker can advise on.
The 2012 Scirocco is part of the Mk3 generation (2008–2017) and is fitted with an electronic parking brake, meaning no handbrake cable exists on this vehicle. The component responsible for holding the car stationary is an electrically operated actuator, sometimes referred to as an EPB actuator or electric parking brake motor. When contacting a breaker, describe the fault you are experiencing and ask specifically about the electronic parking brake actuator rather than a cable.
The Mk1 (1974–1982) and Mk2 (1982–1992) Scirocco models did use traditional handbrake cables, but the Mk3 (2008–2017) has a completely different electronic parking brake system with no cable at all, so these parts are entirely incompatible. If you own a Mk3, you need an electronic parking brake actuator, not a cable. If you own an Mk1 or Mk2, confirm the exact year and engine size with your breaker, as cable specifications can vary across those earlier generations.
Trim level – whether R, GT, GTS or any other variant – makes no difference here, because no Mk3 Scirocco in any trim uses a handbrake cable; all variants were built with an electronic parking brake. If you are sourcing parts for a parking brake fault on any Mk3 trim, the part to look for is the electronic parking brake actuator. For Mk1 or Mk2 Sciroccos where a cable does exist, confirm your year and engine size with the breaker rather than relying on trim name alone.
On a Mk3 Scirocco (2008–2017) there is no cable to wear or snap, so a parking brake that fails to hold will be caused by a fault in the electronic parking brake system – most commonly the actuator motor, its wiring, or a software issue flagged via the vehicle's ECU. A used EPB actuator from a breaker matching your exact year is the used-parts route to explore, but confirm compatibility against your registration when you contact them. For Mk1 or Mk2 owners with a cable-operated system, a stretched or frayed handbrake cable is a genuine possibility and breakers should be able to supply one with the correct year and engine details.