Cheap Vauxhall Meriva Bonnet Strut

The Vauxhall Meriva uses a simple mechanical stay rod to prop the bonnet open rather than gas struts, so there is no bonnet strut fitted to any variant of this model. If your bonnet is not staying up, the part you are most likely looking for is the bonnet stay rod and its retaining clip, or possibly the bonnet hinge if there is a structural issue. Search for 'Vauxhall Meriva bonnet stay rod' or ask a breaker for the prop rod assembly.

The Meriva A (2003–2010) and Meriva B (2010–2017) are entirely different generations on different platforms, so their bonnet stay rods are not interchangeable. Always quote your exact registration to the breaker so they can pull the correct part for your generation. Mixing parts between these two generations is unlikely to work safely.

Both years fall within the Meriva B generation (2010–2017), which received a facelift around 2014, but the bonnet stay rod itself is a simple mechanical prop and fitment within the same generation is generally consistent regardless of facelift. That said, always confirm against your registration with the breaker to be certain, as small running changes can occur across a production run.

Trim level does not affect the bonnet stay rod on the Meriva – Expression, SE, Exclusiv, and other trims all share the same basic bonnet mechanism. The part you need is determined by the generation (Meriva A or Meriva B) and not by the spec of the car. Confirm your registration with the breaker and they will identify the correct rod for your vehicle.

No, the engine fitted to your Meriva does not affect the bonnet stay rod – the same prop rod is used across petrol and diesel variants within each generation. Whether you have a 1.2, 1.4, 1.6 petrol or a 1.3, 1.7 diesel makes no difference to this part. Just confirm your registration with the breaker so they match you to the right generation.