Cheap Vauxhall Antara Handbrake Lever
Need a used Vauxhall Antara handbrake lever? Request a free quote from UK vehicle dismantlers and compare offers direct.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
What to check when buying a used Vauxhall Antara handbrake lever
A used handbrake lever that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:
- State whether it's a manual lever, foot pedal or electronic
Other used Vauxhall Antara parts
- Used Vauxhall Antara Seat
- Used Vauxhall Antara Instrument Cluster
- Used Vauxhall Antara Rear View Mirror
- Used Vauxhall Antara Seat Belt
- Used Vauxhall Antara Engine
- Used Vauxhall Antara Ignition Barrel
- Used Vauxhall Antara Rear Tailgate
- Used Vauxhall Antara Indicator Light
- Used Vauxhall Antara Cylinder Head
- Used Vauxhall Antara Bumper
- Used Vauxhall Antara Throttle Body
- Used Vauxhall Antara Door
Used handbrake lever for other Vauxhall models
Fitment questions
Does the Vauxhall Antara have a traditional handbrake lever, or is there a different parking brake system?
The Vauxhall Antara uses a conventional mechanical handbrake lever mounted in the centre console throughout its production run, so a used lever is a straightforward used part to source. This applies across all engine and drivetrain variants, including both two-wheel-drive and four-wheel-drive versions.
Will a handbrake lever from an early Antara fit a later one – does the year matter?
The Antara ran from 2006 to 2015, with a facelift arriving in 2010 that brought interior changes including a revised centre console. A lever from a pre-facelift car (2006–2010) is unlikely to be a direct fit into a post-facelift car (2010–2015) due to those console changes, but confirm the exact interchange with the breaker against your registration before ordering.
Does the Antara trim level affect which handbrake lever I need – will an S-trim part fit an SE?
The Antara was sold in the UK in trims including S, SE, and CDTi-badged variants, and the trim level can affect the finish and surround of the centre console area where the lever sits. The core mechanical lever assembly is likely similar across trims within the same generation, but cosmetic differences in the gaiter or trim surround may mean a part from a lower trim looks different in a higher-spec car. Check with the breaker that the part matches your specific trim if visual finish matters to you.
Does the engine or gearbox type make a difference when sourcing a handbrake lever for my Antara?
No – the engine and gearbox type do not affect handbrake lever fitment on the Antara; the lever is an interior part tied to the generation and trim rather than the drivetrain. Whether your car is a diesel or petrol, manual or automatic, the lever itself should be the same unit within the same generation and trim level.
Can I fit the handbrake lever myself, or does it need a garage?
Replacing a handbrake lever on an Antara is generally a mechanical job involving disconnecting the cable and unbolting the lever from the centre console, which a competent DIYer can tackle. However, once the work is done the handbrake must be correctly adjusted and tested before the car is used safely, so if you are unsure have a garage carry out or check the work.
I have a 2009 Antara – will a lever from a 2012 car fit it?
A 2009 Antara is a pre-facelift model, while a 2012 car sits in the post-facelift generation that arrived in 2010, meaning there were interior and console revisions between them. It is therefore not safe to assume direct interchangeability across that 2010 boundary, and you should confirm with the breaker whether the specific part number matches your car's registration before buying.