Findapart

Second Hand Škoda Kodiaq Anti Roll Bar

Get quotes for a used or replacement Škoda Kodiaq anti roll bar. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

A buyer's guide to used Škoda Kodiaq anti roll bar

No two anti roll bars are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:

Other used Škoda Kodiaq parts

Used anti roll bar for other Škoda models

Fitment questions

Will an anti-roll bar from a 2018 Kodiaq fit my 2020 Kodiaq?

The Škoda Kodiaq first generation ran from 2017 through to the second-generation arrival in 2023, so a 2018 and a 2020 bar are both from the same generation and are likely to be compatible. However, fitment can vary depending on whether your car is front-wheel drive or four-wheel-drive (Scout or vRS), as these layouts may use different bar diameters or mounting hardware, so always confirm the drivetrain match with the breaker against your registration before buying.

Does the Kodiaq actually have an anti-roll bar, or is it just a regular stabiliser bar?

Yes, the Škoda Kodiaq is fitted with anti-roll bars (also called stabiliser bars or sway bars) at both the front and rear axles across all variants. Whether you need the front or rear bar, make sure you specify which end to the breaker, as they are completely different parts and not interchangeable with each other.

Does the trim level matter when buying a second-hand Kodiaq anti-roll bar — for example, does an SE bar fit an Elegance or an Edition?

Trim level alone — SE, SE L, Sportline, Laurin & Klement, Edition — does not affect which anti-roll bar was fitted, so you do not need to match trim badges. What does matter is the drivetrain (front-wheel drive versus four-wheel drive) and the engine, as heavier or more powerful variants may use different bar specifications, so focus on those details rather than the trim name when sourcing from a breaker.

Will a Kodiaq anti-roll bar from before the 2021 facelift fit a post-facelift model?

The Kodiaq received a facelift for the 2021 model year, which refreshed styling and technology but sat within the same first-generation platform running from 2017 to 2023. Whether running gear components like the anti-roll bar interchange across that 2021 facelift boundary is something you should confirm with the breaker against both registrations, as platform continuity does not guarantee every suspension component is identical.

Does it matter whether my Kodiaq is two-wheel drive or four-wheel drive when sourcing an anti-roll bar?

Yes, this is one of the most important things to match — the front and rear anti-roll bar specifications can differ between the front-wheel-drive and four-wheel-drive (4x4) versions of the Kodiaq because of differences in weight distribution and axle loading. Always tell the breaker your drivetrain type and give them your registration so they can check against the correct vehicle specification before supplying a bar.

Is a Kodiaq anti-roll bar the same as a Skoda Karoq or Octavia bar?

The Kodiaq, Karoq, and Octavia share Volkswagen Group platform architecture but are different sizes and weights, meaning their anti-roll bar dimensions and mounting points are generally not directly interchangeable. Stick to bars pulled from another Kodiaq of the same generation and drivetrain, and ask the breaker to verify compatibility against your registration rather than assuming group-platform parts will swap across model lines.