Compare prices on a used Škoda Octavia fuel filter from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Fitment on a used fuel filter varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:
Yes, but it depends on which engine your Octavia has. Petrol Octavias from the later generations (Mk3 onwards, 2013 onwards) typically have a non-serviceable filter integrated inside the fuel tank as part of the pump assembly, meaning there is no separate in-line filter to source as a used part. Diesel Octavias across all generations (Mk1 1996–2010, Mk2 2004–2013, Mk3 2013–2020, Mk4 2020 onwards) do have a replaceable external fuel filter, so if you have a diesel Octavia you are in the right place. Early petrol Octavias (Mk1 and some Mk2) may have an in-line filter, so confirm with a breaker against your registration if you have a petrol from that era.
This crosses a significant generation boundary — the Mk2 ran through to 2013 and the Mk3 launched in 2013 — so a 2010 Octavia is Mk2 and a 2013 car could be either the last of the Mk2 or an early Mk3. Even if both are diesel, the engine codes changed significantly between generations (for example the 2.0 TDI moved through different code variants), and the filter housing and mounting arrangement often changed with them. The engine code is the key detail here, so share yours with the breaker who will be able to confirm whether the part crosses that boundary safely.
No, trim level makes no difference to fuel filter fitment on the Octavia — the filter follows the engine, not the badge. An SE and a VRS running the same engine code will use the same fuel filter. The only thing worth noting is that the VRS diesel typically uses the higher-output variant of the 2.0 TDI, so confirm the engine code on your V5 or via a VIN check to make sure the breaker is matching on engine rather than just model name.
Engine code matters a great deal on Octavia diesel fuel filters because Škoda used several different TDI engine families across each generation — for example the Mk2 alone ran PD (pumpe-düse) units and later common-rail units, which have different filter setups. Year and fuel type will get you into the right ballpark, but two cars from the same year can have different engine codes and incompatible filters. The engine code is stamped on the engine block and also appears on your V5C, or a free VIN check online will surface it — give that to the breaker and they can match with confidence.
Within the Mk3 generation (2013–2020, facelifted in 2017) most 2.0 TDI variants share a common filter, but the 1.6 TDI uses a different unit, so you cannot assume all Mk3 diesel filters are interchangeable. The Mk3 facelift in 2017 also brought some ancillary and mounting updates, so whether a pre-facelift filter fits a post-facelift car or vice versa is worth confirming with the breaker against your registration. Your engine code from the V5 is the single most useful detail to supply when requesting a quote.
Quite possibly yes — the Octavia shares its platform and many engines with the VW Golf, SEAT Leon, and Audi A3 of the same generation, and where the engine code is identical the fuel filter is often the same part. However, platform-sharing does not guarantee that every ancillary part or mounting bracket is identical, and subtle differences do exist. Give the breaker both your registration and your engine code and let them cross-reference — a good dismantler will check the part number rather than assume, and many Findapart breakers hold stock from across the VAG group.